Browse Source

Add 410CST1582 replica board

master
squeaky otter 2 years ago
commit
2b465e721f
Signed by: dashie GPG Key ID: C2D57B325840B755
  1. 5
      .gitignore
  2. 3
      410CST1582/410CST1582-rescue.dcm
  3. 25
      410CST1582/410CST1582-rescue.lib
  4. 920
      410CST1582/410CST1582.kicad_pcb
  5. 252
      410CST1582/410CST1582.net
  6. 249
      410CST1582/410CST1582.pro
  7. 388
      410CST1582/410CST1582.sch
  8. 71723
      410CST1582/fp-info-cache
  9. BIN
      410CST1582/gerbers.zip
  10. 94
      410CST1582/gerbers/410CST1582-B_Cu.gbr
  11. 2206
      410CST1582/gerbers/410CST1582-B_Mask.gbr
  12. 14
      410CST1582/gerbers/410CST1582-B_Paste.gbr
  13. 130
      410CST1582/gerbers/410CST1582-B_SilkS.gbr
  14. 23
      410CST1582/gerbers/410CST1582-Edge_Cuts.gbr
  15. 279
      410CST1582/gerbers/410CST1582-F_Cu.gbr
  16. 2206
      410CST1582/gerbers/410CST1582-F_Mask.gbr
  17. 14
      410CST1582/gerbers/410CST1582-F_Paste.gbr
  18. 1336
      410CST1582/gerbers/410CST1582-F_SilkS.gbr
  19. 72
      410CST1582/gerbers/410CST1582.drl
  20. 3
      410CST1582/sym-lib-table

5
.gitignore

@ -0,0 +1,5 @@
*.bak
*-bak
*.pdf
*-cache.lib
*.tmp

3
410CST1582/410CST1582-rescue.dcm

@ -0,0 +1,3 @@
EESchema-DOCLIB Version 2.0
#
#End Doc Library

25
410CST1582/410CST1582-rescue.lib

@ -0,0 +1,25 @@
EESchema-LIBRARY Version 2.4
#encoding utf-8
#
# MJ-188LP-8-d_connectors
#
DEF MJ-188LP-8-d_connectors J 0 40 Y Y 1 F N
F0 "J" 0 0 50 H V C CNN
F1 "MJ-188LP-8-d_connectors" 0 -250 50 H V C CNN
F2 "" 0 0 50 H I C CNN
F3 "" 0 0 50 H I C CNN
DRAW
S -250 -200 250 -300 0 1 0 N
X ~ 1 150 -400 100 U 50 50 1 1 B
X ~ 2 150 -100 100 D 50 50 1 1 B
X ~ 3 50 -100 100 D 50 50 1 1 B
X ~ 4 50 -400 100 U 50 50 1 1 B
X ~ 5 -150 -400 100 U 50 50 1 1 B
X ~ 6 -150 -100 100 D 50 50 1 1 B
X ~ 7 -50 -100 100 D 50 50 1 1 B
X ~ 8 -50 -400 100 U 50 50 1 1 B
X gnd 9 -350 -250 100 R 50 50 1 1 I
ENDDRAW
ENDDEF
#
#End Library

920
410CST1582/410CST1582.kicad_pcb

@ -0,0 +1,920 @@
(kicad_pcb (version 20171130) (host pcbnew "(5.1.2-1)-1")
(general
(thickness 1.6)
(drawings 14)
(tracks 90)
(zones 0)
(modules 13)
(nets 30)
)
(page A4)
(layers
(0 F.Cu signal)
(31 B.Cu signal)
(32 B.Adhes user)
(33 F.Adhes user)
(34 B.Paste user)
(35 F.Paste user)
(36 B.SilkS user)
(37 F.SilkS user)
(38 B.Mask user)
(39 F.Mask user)
(40 Dwgs.User user)
(41 Cmts.User user)
(42 Eco1.User user)
(43 Eco2.User user)
(44 Edge.Cuts user)
(45 Margin user)
(46 B.CrtYd user)
(47 F.CrtYd user)
(48 B.Fab user hide)
(49 F.Fab user hide)
)
(setup
(last_trace_width 0.25)
(trace_clearance 0.2)
(zone_clearance 0.508)
(zone_45_only no)
(trace_min 0.2)
(via_size 0.8)
(via_drill 0.4)
(via_min_size 0.4)
(via_min_drill 0.3)
(uvia_size 0.3)
(uvia_drill 0.1)
(uvias_allowed no)
(uvia_min_size 0.2)
(uvia_min_drill 0.1)
(edge_width 0.05)
(segment_width 0.2)
(pcb_text_width 0.3)
(pcb_text_size 1.5 1.5)
(mod_edge_width 0.12)
(mod_text_size 1 1)
(mod_text_width 0.15)
(pad_size 1.524 1.524)
(pad_drill 0.762)
(pad_to_mask_clearance 0.051)
(solder_mask_min_width 0.25)
(aux_axis_origin 0 0)
(visible_elements FFFFFF7F)
(pcbplotparams
(layerselection 0x010fc_ffffffff)
(usegerberextensions false)
(usegerberattributes false)
(usegerberadvancedattributes false)
(creategerberjobfile false)
(excludeedgelayer true)
(linewidth 0.100000)
(plotframeref false)
(viasonmask false)
(mode 1)
(useauxorigin false)
(hpglpennumber 1)
(hpglpenspeed 20)
(hpglpendiameter 15.000000)
(psnegative false)
(psa4output false)
(plotreference true)
(plotvalue true)
(plotinvisibletext false)
(padsonsilk false)
(subtractmaskfromsilk false)
(outputformat 1)
(mirror false)
(drillshape 0)
(scaleselection 1)
(outputdirectory "gerbers"))
)
(net 0 "")
(net 1 OAD)
(net 2 OPL)
(net 3 OPR)
(net 4 MIDL)
(net 5 MIDR)
(net 6 OAL)
(net 7 GND)
(net 8 "Net-(J4-Pad8)")
(net 9 "Net-(J4-Pad7)")
(net 10 "Net-(J4-Pad6)")
(net 11 "Net-(J4-Pad5)")
(net 12 "Net-(J4-Pad4)")
(net 13 "Net-(J4-Pad3)")
(net 14 "Net-(J4-Pad2)")
(net 15 "Net-(J4-Pad1)")
(net 16 "Net-(J5-Pad8)")
(net 17 "Net-(J5-Pad5)")
(net 18 "Net-(J5-Pad4)")
(net 19 "Net-(J5-Pad1)")
(net 20 "Net-(R14-Pad1)")
(net 21 "Net-(R15-Pad1)")
(net 22 "Net-(J5-Pad2)")
(net 23 "Net-(J5-Pad3)")
(net 24 "Net-(J5-Pad6)")
(net 25 "Net-(J5-Pad7)")
(net 26 "Net-(J6-Pad1)")
(net 27 "Net-(J6-Pad4)")
(net 28 "Net-(J6-Pad5)")
(net 29 "Net-(J6-Pad8)")
(net_class Default "This is the default net class."
(clearance 0.2)
(trace_width 0.25)
(via_dia 0.8)
(via_drill 0.4)
(uvia_dia 0.3)
(uvia_drill 0.1)
(add_net MIDL)
(add_net MIDR)
(add_net "Net-(J4-Pad1)")
(add_net "Net-(J4-Pad2)")
(add_net "Net-(J4-Pad3)")
(add_net "Net-(J4-Pad4)")
(add_net "Net-(J4-Pad5)")
(add_net "Net-(J4-Pad6)")
(add_net "Net-(J4-Pad7)")
(add_net "Net-(J4-Pad8)")
(add_net "Net-(J5-Pad1)")
(add_net "Net-(J5-Pad2)")
(add_net "Net-(J5-Pad3)")
(add_net "Net-(J5-Pad4)")
(add_net "Net-(J5-Pad5)")
(add_net "Net-(J5-Pad6)")
(add_net "Net-(J5-Pad7)")
(add_net "Net-(J5-Pad8)")
(add_net "Net-(J6-Pad1)")
(add_net "Net-(J6-Pad4)")
(add_net "Net-(J6-Pad5)")
(add_net "Net-(J6-Pad8)")
(add_net "Net-(R14-Pad1)")
(add_net "Net-(R15-Pad1)")
(add_net OAD)
(add_net OAL)
(add_net OPL)
(add_net OPR)
)
(net_class GND ""
(clearance 0.2)
(trace_width 0.5)
(via_dia 0.8)
(via_drill 0.4)
(uvia_dia 0.3)
(uvia_drill 0.1)
(add_net GND)
)
(module d_connectors:MJ-188LP-8 locked (layer B.Cu) (tedit 5DA5FDA0) (tstamp 5DA63AB4)
(at 97.4 55.875 180)
(path /5DA5DDC7)
(fp_text reference J4 (at 0 -0.5 180) (layer B.SilkS)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text value left (at 0 -3 180) (layer B.Fab)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_line (start 9 0) (end -9 0) (layer F.SilkS) (width 0.12))
(fp_line (start -5.9 0) (end -5.9 8.8) (layer F.SilkS) (width 0.12))
(fp_line (start -5.9 8.8) (end 5.9 8.8) (layer F.SilkS) (width 0.12))
(fp_line (start 5.9 8.8) (end 5.9 0) (layer F.SilkS) (width 0.12))
(fp_line (start -9 0) (end -9 -26) (layer F.SilkS) (width 0.12))
(fp_line (start -9 -26) (end 9 -26) (layer F.SilkS) (width 0.12))
(fp_line (start 9 -26) (end 9 0) (layer F.SilkS) (width 0.12))
(pad 5 thru_hole circle (at 7.5 -22.4 180) (size 3 3) (drill 2) (layers *.Cu *.Mask)
(net 11 "Net-(J4-Pad5)"))
(pad 6 thru_hole circle (at 7.5 -14.8 180) (size 3 3) (drill 2) (layers *.Cu *.Mask)
(net 10 "Net-(J4-Pad6)"))
(pad 7 thru_hole circle (at 2.5 -14.8 180) (size 3 3) (drill 2) (layers *.Cu *.Mask)
(net 9 "Net-(J4-Pad7)"))
(pad 8 thru_hole circle (at 2.5 -22.4 180) (size 3 3) (drill 2) (layers *.Cu *.Mask)
(net 8 "Net-(J4-Pad8)"))
(pad 1 thru_hole circle (at -7.5 -22.4 180) (size 3 3) (drill 2) (layers *.Cu *.Mask)
(net 15 "Net-(J4-Pad1)"))
(pad 2 thru_hole circle (at -7.5 -14.8 180) (size 3 3) (drill 2) (layers *.Cu *.Mask)
(net 14 "Net-(J4-Pad2)"))
(pad 3 thru_hole circle (at -2.5 -14.8 180) (size 3 3) (drill 2) (layers *.Cu *.Mask)
(net 13 "Net-(J4-Pad3)"))
(pad 4 thru_hole circle (at -2.5 -22.4 180) (size 3 3) (drill 2) (layers *.Cu *.Mask)
(net 12 "Net-(J4-Pad4)"))
(pad 9 thru_hole circle (at 0 -7 180) (size 3 3) (drill 2) (layers *.Cu *.Mask)
(net 7 GND))
)
(module d_connectors:MJ-188LP-8 locked (layer B.Cu) (tedit 5DA5FDA0) (tstamp 5DA63AC8)
(at 117.4 55.875 180)
(path /5DA5E8EF)
(fp_text reference J5 (at 0 -0.5) (layer B.SilkS)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text value right (at 0 -3) (layer B.Fab)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_line (start 9 0) (end -9 0) (layer F.SilkS) (width 0.12))
(fp_line (start -5.9 0) (end -5.9 8.8) (layer F.SilkS) (width 0.12))
(fp_line (start -5.9 8.8) (end 5.9 8.8) (layer F.SilkS) (width 0.12))
(fp_line (start 5.9 8.8) (end 5.9 0) (layer F.SilkS) (width 0.12))
(fp_line (start -9 0) (end -9 -26) (layer F.SilkS) (width 0.12))
(fp_line (start -9 -26) (end 9 -26) (layer F.SilkS) (width 0.12))
(fp_line (start 9 -26) (end 9 0) (layer F.SilkS) (width 0.12))
(pad 5 thru_hole circle (at 7.5 -22.4 180) (size 3 3) (drill 2) (layers *.Cu *.Mask)
(net 17 "Net-(J5-Pad5)"))
(pad 6 thru_hole circle (at 7.5 -14.8 180) (size 3 3) (drill 2) (layers *.Cu *.Mask)
(net 24 "Net-(J5-Pad6)"))
(pad 7 thru_hole circle (at 2.5 -14.8 180) (size 3 3) (drill 2) (layers *.Cu *.Mask)
(net 25 "Net-(J5-Pad7)"))
(pad 8 thru_hole circle (at 2.5 -22.4 180) (size 3 3) (drill 2) (layers *.Cu *.Mask)
(net 16 "Net-(J5-Pad8)"))
(pad 1 thru_hole circle (at -7.5 -22.4 180) (size 3 3) (drill 2) (layers *.Cu *.Mask)
(net 19 "Net-(J5-Pad1)"))
(pad 2 thru_hole circle (at -7.5 -14.8 180) (size 3 3) (drill 2) (layers *.Cu *.Mask)
(net 22 "Net-(J5-Pad2)"))
(pad 3 thru_hole circle (at -2.5 -14.8 180) (size 3 3) (drill 2) (layers *.Cu *.Mask)
(net 23 "Net-(J5-Pad3)"))
(pad 4 thru_hole circle (at -2.5 -22.4 180) (size 3 3) (drill 2) (layers *.Cu *.Mask)
(net 18 "Net-(J5-Pad4)"))
(pad 9 thru_hole circle (at 0 -7 180) (size 3 3) (drill 2) (layers *.Cu *.Mask)
(net 7 GND))
)
(module d_connectors:MJ-188LP-8 locked (layer B.Cu) (tedit 5DA5FDA0) (tstamp 5DA63ADC)
(at 137.6 55.875 180)
(path /5DA5F0F3)
(fp_text reference J6 (at 0 -0.5) (layer B.SilkS)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text value headphone (at 0 -3) (layer B.Fab)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_line (start 9 0) (end -9 0) (layer F.SilkS) (width 0.12))
(fp_line (start -5.9 0) (end -5.9 8.8) (layer F.SilkS) (width 0.12))
(fp_line (start -5.9 8.8) (end 5.9 8.8) (layer F.SilkS) (width 0.12))
(fp_line (start 5.9 8.8) (end 5.9 0) (layer F.SilkS) (width 0.12))
(fp_line (start -9 0) (end -9 -26) (layer F.SilkS) (width 0.12))
(fp_line (start -9 -26) (end 9 -26) (layer F.SilkS) (width 0.12))
(fp_line (start 9 -26) (end 9 0) (layer F.SilkS) (width 0.12))
(pad 5 thru_hole circle (at 7.5 -22.4 180) (size 3 3) (drill 2) (layers *.Cu *.Mask)
(net 28 "Net-(J6-Pad5)"))
(pad 6 thru_hole circle (at 7.5 -14.8 180) (size 3 3) (drill 2) (layers *.Cu *.Mask)
(net 1 OAD))
(pad 7 thru_hole circle (at 2.5 -14.8 180) (size 3 3) (drill 2) (layers *.Cu *.Mask)
(net 5 MIDR))
(pad 8 thru_hole circle (at 2.5 -22.4 180) (size 3 3) (drill 2) (layers *.Cu *.Mask)
(net 29 "Net-(J6-Pad8)"))
(pad 1 thru_hole circle (at -7.5 -22.4 180) (size 3 3) (drill 2) (layers *.Cu *.Mask)
(net 26 "Net-(J6-Pad1)"))
(pad 2 thru_hole circle (at -7.5 -14.8 180) (size 3 3) (drill 2) (layers *.Cu *.Mask)
(net 6 OAL))
(pad 3 thru_hole circle (at -2.5 -14.8 180) (size 3 3) (drill 2) (layers *.Cu *.Mask)
(net 4 MIDL))
(pad 4 thru_hole circle (at -2.5 -22.4 180) (size 3 3) (drill 2) (layers *.Cu *.Mask)
(net 27 "Net-(J6-Pad4)"))
(pad 9 thru_hole circle (at 0 -7 180) (size 3 3) (drill 2) (layers *.Cu *.Mask)
(net 7 GND))
)
(module TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type055_RT01503HDWU_1x03_P5.00mm_Horizontal (layer F.Cu) (tedit 5B294EA7) (tstamp 5DA687A2)
(at 81.5 98.5)
(descr "terminal block Metz Connect Type055_RT01503HDWU, 3 pins, pitch 5mm, size 15x8mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_310551_RT015xxHDWU_OFF-022723S.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect")
(tags "THT terminal block Metz Connect Type055_RT01503HDWU pitch 5mm size 15x8mm^2 drill 1.3mm pad 2.5mm")
(path /5DA8D91A)
(fp_text reference J2 (at 5 -5.06) (layer F.SilkS) hide
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value Screw_Terminal_01x03 (at 5 5.06) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 5 3) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 13 -4.5) (end -3 -4.5) (layer F.CrtYd) (width 0.05))
(fp_line (start 13 4.5) (end 13 -4.5) (layer F.CrtYd) (width 0.05))
(fp_line (start -3 4.5) (end 13 4.5) (layer F.CrtYd) (width 0.05))
(fp_line (start -3 -4.5) (end -3 4.5) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.8 4.3) (end -0.8 4.3) (layer F.SilkS) (width 0.12))
(fp_line (start -2.8 2.06) (end -2.8 4.3) (layer F.SilkS) (width 0.12))
(fp_line (start 8.82 0.976) (end 8.726 1.069) (layer F.SilkS) (width 0.12))
(fp_line (start 11.07 -1.275) (end 11.011 -1.216) (layer F.SilkS) (width 0.12))
(fp_line (start 8.99 1.216) (end 8.931 1.274) (layer F.SilkS) (width 0.12))
(fp_line (start 11.275 -1.069) (end 11.181 -0.976) (layer F.SilkS) (width 0.12))
(fp_line (start 10.955 -1.138) (end 8.863 0.955) (layer F.Fab) (width 0.1))
(fp_line (start 11.138 -0.955) (end 9.046 1.138) (layer F.Fab) (width 0.1))
(fp_line (start 3.82 0.976) (end 3.726 1.069) (layer F.SilkS) (width 0.12))
(fp_line (start 6.07 -1.275) (end 6.011 -1.216) (layer F.SilkS) (width 0.12))
(fp_line (start 3.99 1.216) (end 3.931 1.274) (layer F.SilkS) (width 0.12))
(fp_line (start 6.275 -1.069) (end 6.181 -0.976) (layer F.SilkS) (width 0.12))
(fp_line (start 5.955 -1.138) (end 3.863 0.955) (layer F.Fab) (width 0.1))
(fp_line (start 6.138 -0.955) (end 4.046 1.138) (layer F.Fab) (width 0.1))
(fp_line (start 0.955 -1.138) (end -1.138 0.955) (layer F.Fab) (width 0.1))
(fp_line (start 1.138 -0.955) (end -0.955 1.138) (layer F.Fab) (width 0.1))
(fp_line (start 12.56 -4.06) (end 12.56 4.06) (layer F.SilkS) (width 0.12))
(fp_line (start -2.56 -4.06) (end -2.56 4.06) (layer F.SilkS) (width 0.12))
(fp_line (start -2.56 4.06) (end 12.56 4.06) (layer F.SilkS) (width 0.12))
(fp_line (start -2.56 -4.06) (end 12.56 -4.06) (layer F.SilkS) (width 0.12))
(fp_line (start -2.56 -2) (end 12.56 -2) (layer F.SilkS) (width 0.12))
(fp_line (start -2.5 -2) (end 12.5 -2) (layer F.Fab) (width 0.1))
(fp_line (start -2.56 2) (end 12.56 2) (layer F.SilkS) (width 0.12))
(fp_line (start -2.5 2) (end 12.5 2) (layer F.Fab) (width 0.1))
(fp_line (start -2.5 2) (end -2.5 -4) (layer F.Fab) (width 0.1))
(fp_line (start -0.5 4) (end -2.5 2) (layer F.Fab) (width 0.1))
(fp_line (start 12.5 4) (end -0.5 4) (layer F.Fab) (width 0.1))
(fp_line (start 12.5 -4) (end 12.5 4) (layer F.Fab) (width 0.1))
(fp_line (start -2.5 -4) (end 12.5 -4) (layer F.Fab) (width 0.1))
(fp_circle (center 10 0) (end 11.68 0) (layer F.SilkS) (width 0.12))
(fp_circle (center 10 0) (end 11.5 0) (layer F.Fab) (width 0.1))
(fp_circle (center 5 0) (end 6.68 0) (layer F.SilkS) (width 0.12))
(fp_circle (center 5 0) (end 6.5 0) (layer F.Fab) (width 0.1))
(fp_circle (center 0 0) (end 1.5 0) (layer F.Fab) (width 0.1))
(fp_arc (start 0 0) (end -0.789 1.484) (angle -29) (layer F.SilkS) (width 0.12))
(fp_arc (start 0 0) (end -1.484 -0.789) (angle -56) (layer F.SilkS) (width 0.12))
(fp_arc (start 0 0) (end 0.789 -1.484) (angle -56) (layer F.SilkS) (width 0.12))
(fp_arc (start 0 0) (end 1.484 0.789) (angle -56) (layer F.SilkS) (width 0.12))
(fp_arc (start 0 0) (end 0 1.68) (angle -28) (layer F.SilkS) (width 0.12))
(pad 3 thru_hole circle (at 10 0) (size 2.5 2.5) (drill 1.3) (layers *.Cu *.Mask)
(net 1 OAD))
(pad 2 thru_hole circle (at 5 0) (size 2.5 2.5) (drill 1.3) (layers *.Cu *.Mask)
(net 7 GND))
(pad 1 thru_hole rect (at 0 0) (size 2.5 2.5) (drill 1.3) (layers *.Cu *.Mask)
(net 7 GND))
(model ${KISYS3DMOD}/TerminalBlock_MetzConnect.3dshapes/TerminalBlock_MetzConnect_Type055_RT01503HDWU_1x03_P5.00mm_Horizontal.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type055_RT01503HDWU_1x03_P5.00mm_Horizontal (layer F.Cu) (tedit 5B294EA7) (tstamp 5DA6762D)
(at 98 98.5)
(descr "terminal block Metz Connect Type055_RT01503HDWU, 3 pins, pitch 5mm, size 15x8mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_310551_RT015xxHDWU_OFF-022723S.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect")
(tags "THT terminal block Metz Connect Type055_RT01503HDWU pitch 5mm size 15x8mm^2 drill 1.3mm pad 2.5mm")
(path /5DA643EF)
(fp_text reference J3 (at 11 -3) (layer F.SilkS) hide
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value Screw_Terminal_01x03 (at 5 5.06) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 5 3) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 13 -4.5) (end -3 -4.5) (layer F.CrtYd) (width 0.05))
(fp_line (start 13 4.5) (end 13 -4.5) (layer F.CrtYd) (width 0.05))
(fp_line (start -3 4.5) (end 13 4.5) (layer F.CrtYd) (width 0.05))
(fp_line (start -3 -4.5) (end -3 4.5) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.8 4.3) (end -0.8 4.3) (layer F.SilkS) (width 0.12))
(fp_line (start -2.8 2.06) (end -2.8 4.3) (layer F.SilkS) (width 0.12))
(fp_line (start 8.82 0.976) (end 8.726 1.069) (layer F.SilkS) (width 0.12))
(fp_line (start 11.07 -1.275) (end 11.011 -1.216) (layer F.SilkS) (width 0.12))
(fp_line (start 8.99 1.216) (end 8.931 1.274) (layer F.SilkS) (width 0.12))
(fp_line (start 11.275 -1.069) (end 11.181 -0.976) (layer F.SilkS) (width 0.12))
(fp_line (start 10.955 -1.138) (end 8.863 0.955) (layer F.Fab) (width 0.1))
(fp_line (start 11.138 -0.955) (end 9.046 1.138) (layer F.Fab) (width 0.1))
(fp_line (start 3.82 0.976) (end 3.726 1.069) (layer F.SilkS) (width 0.12))
(fp_line (start 6.07 -1.275) (end 6.011 -1.216) (layer F.SilkS) (width 0.12))
(fp_line (start 3.99 1.216) (end 3.931 1.274) (layer F.SilkS) (width 0.12))
(fp_line (start 6.275 -1.069) (end 6.181 -0.976) (layer F.SilkS) (width 0.12))
(fp_line (start 5.955 -1.138) (end 3.863 0.955) (layer F.Fab) (width 0.1))
(fp_line (start 6.138 -0.955) (end 4.046 1.138) (layer F.Fab) (width 0.1))
(fp_line (start 0.955 -1.138) (end -1.138 0.955) (layer F.Fab) (width 0.1))
(fp_line (start 1.138 -0.955) (end -0.955 1.138) (layer F.Fab) (width 0.1))
(fp_line (start 12.56 -4.06) (end 12.56 4.06) (layer F.SilkS) (width 0.12))
(fp_line (start -2.56 -4.06) (end -2.56 4.06) (layer F.SilkS) (width 0.12))
(fp_line (start -2.56 4.06) (end 12.56 4.06) (layer F.SilkS) (width 0.12))
(fp_line (start -2.56 -4.06) (end 12.56 -4.06) (layer F.SilkS) (width 0.12))
(fp_line (start -2.56 -2) (end 12.56 -2) (layer F.SilkS) (width 0.12))
(fp_line (start -2.5 -2) (end 12.5 -2) (layer F.Fab) (width 0.1))
(fp_line (start -2.56 2) (end 12.56 2) (layer F.SilkS) (width 0.12))
(fp_line (start -2.5 2) (end 12.5 2) (layer F.Fab) (width 0.1))
(fp_line (start -2.5 2) (end -2.5 -4) (layer F.Fab) (width 0.1))
(fp_line (start -0.5 4) (end -2.5 2) (layer F.Fab) (width 0.1))
(fp_line (start 12.5 4) (end -0.5 4) (layer F.Fab) (width 0.1))
(fp_line (start 12.5 -4) (end 12.5 4) (layer F.Fab) (width 0.1))
(fp_line (start -2.5 -4) (end 12.5 -4) (layer F.Fab) (width 0.1))
(fp_circle (center 10 0) (end 11.68 0) (layer F.SilkS) (width 0.12))
(fp_circle (center 10 0) (end 11.5 0) (layer F.Fab) (width 0.1))
(fp_circle (center 5 0) (end 6.68 0) (layer F.SilkS) (width 0.12))
(fp_circle (center 5 0) (end 6.5 0) (layer F.Fab) (width 0.1))
(fp_circle (center 0 0) (end 1.5 0) (layer F.Fab) (width 0.1))
(fp_arc (start 0 0) (end -0.789 1.484) (angle -29) (layer F.SilkS) (width 0.12))
(fp_arc (start 0 0) (end -1.484 -0.789) (angle -56) (layer F.SilkS) (width 0.12))
(fp_arc (start 0 0) (end 0.789 -1.484) (angle -56) (layer F.SilkS) (width 0.12))
(fp_arc (start 0 0) (end 1.484 0.789) (angle -56) (layer F.SilkS) (width 0.12))
(fp_arc (start 0 0) (end 0 1.68) (angle -28) (layer F.SilkS) (width 0.12))
(pad 3 thru_hole circle (at 10 0) (size 2.5 2.5) (drill 1.3) (layers *.Cu *.Mask)
(net 6 OAL))
(pad 2 thru_hole circle (at 5 0) (size 2.5 2.5) (drill 1.3) (layers *.Cu *.Mask)
(net 4 MIDL))
(pad 1 thru_hole rect (at 0 0) (size 2.5 2.5) (drill 1.3) (layers *.Cu *.Mask)
(net 5 MIDR))
(model ${KISYS3DMOD}/TerminalBlock_MetzConnect.3dshapes/TerminalBlock_MetzConnect_Type055_RT01503HDWU_1x03_P5.00mm_Horizontal.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type055_RT01503HDWU_1x03_P5.00mm_Horizontal (layer F.Cu) (tedit 5B294EA7) (tstamp 5DA63A1D)
(at 65 98.5)
(descr "terminal block Metz Connect Type055_RT01503HDWU, 3 pins, pitch 5mm, size 15x8mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_310551_RT015xxHDWU_OFF-022723S.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect")
(tags "THT terminal block Metz Connect Type055_RT01503HDWU pitch 5mm size 15x8mm^2 drill 1.3mm pad 2.5mm")
(path /5DA61FDD)
(fp_text reference J1 (at 11 3) (layer F.SilkS) hide
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value Screw_Terminal_01x03 (at 5 5.06) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 5 3) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 13 -4.5) (end -3 -4.5) (layer F.CrtYd) (width 0.05))
(fp_line (start 13 4.5) (end 13 -4.5) (layer F.CrtYd) (width 0.05))
(fp_line (start -3 4.5) (end 13 4.5) (layer F.CrtYd) (width 0.05))
(fp_line (start -3 -4.5) (end -3 4.5) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.8 4.3) (end -0.8 4.3) (layer F.SilkS) (width 0.12))
(fp_line (start -2.8 2.06) (end -2.8 4.3) (layer F.SilkS) (width 0.12))
(fp_line (start 8.82 0.976) (end 8.726 1.069) (layer F.SilkS) (width 0.12))
(fp_line (start 11.07 -1.275) (end 11.011 -1.216) (layer F.SilkS) (width 0.12))
(fp_line (start 8.99 1.216) (end 8.931 1.274) (layer F.SilkS) (width 0.12))
(fp_line (start 11.275 -1.069) (end 11.181 -0.976) (layer F.SilkS) (width 0.12))
(fp_line (start 10.955 -1.138) (end 8.863 0.955) (layer F.Fab) (width 0.1))
(fp_line (start 11.138 -0.955) (end 9.046 1.138) (layer F.Fab) (width 0.1))
(fp_line (start 3.82 0.976) (end 3.726 1.069) (layer F.SilkS) (width 0.12))
(fp_line (start 6.07 -1.275) (end 6.011 -1.216) (layer F.SilkS) (width 0.12))
(fp_line (start 3.99 1.216) (end 3.931 1.274) (layer F.SilkS) (width 0.12))
(fp_line (start 6.275 -1.069) (end 6.181 -0.976) (layer F.SilkS) (width 0.12))
(fp_line (start 5.955 -1.138) (end 3.863 0.955) (layer F.Fab) (width 0.1))
(fp_line (start 6.138 -0.955) (end 4.046 1.138) (layer F.Fab) (width 0.1))
(fp_line (start 0.955 -1.138) (end -1.138 0.955) (layer F.Fab) (width 0.1))
(fp_line (start 1.138 -0.955) (end -0.955 1.138) (layer F.Fab) (width 0.1))
(fp_line (start 12.56 -4.06) (end 12.56 4.06) (layer F.SilkS) (width 0.12))
(fp_line (start -2.56 -4.06) (end -2.56 4.06) (layer F.SilkS) (width 0.12))
(fp_line (start -2.56 4.06) (end 12.56 4.06) (layer F.SilkS) (width 0.12))
(fp_line (start -2.56 -4.06) (end 12.56 -4.06) (layer F.SilkS) (width 0.12))
(fp_line (start -2.56 -2) (end 12.56 -2) (layer F.SilkS) (width 0.12))
(fp_line (start -2.5 -2) (end 12.5 -2) (layer F.Fab) (width 0.1))
(fp_line (start -2.56 2) (end 12.56 2) (layer F.SilkS) (width 0.12))
(fp_line (start -2.5 2) (end 12.5 2) (layer F.Fab) (width 0.1))
(fp_line (start -2.5 2) (end -2.5 -4) (layer F.Fab) (width 0.1))
(fp_line (start -0.5 4) (end -2.5 2) (layer F.Fab) (width 0.1))
(fp_line (start 12.5 4) (end -0.5 4) (layer F.Fab) (width 0.1))
(fp_line (start 12.5 -4) (end 12.5 4) (layer F.Fab) (width 0.1))
(fp_line (start -2.5 -4) (end 12.5 -4) (layer F.Fab) (width 0.1))
(fp_circle (center 10 0) (end 11.68 0) (layer F.SilkS) (width 0.12))
(fp_circle (center 10 0) (end 11.5 0) (layer F.Fab) (width 0.1))
(fp_circle (center 5 0) (end 6.68 0) (layer F.SilkS) (width 0.12))
(fp_circle (center 5 0) (end 6.5 0) (layer F.Fab) (width 0.1))
(fp_circle (center 0 0) (end 1.5 0) (layer F.Fab) (width 0.1))
(fp_arc (start 0 0) (end -0.789 1.484) (angle -29) (layer F.SilkS) (width 0.12))
(fp_arc (start 0 0) (end -1.484 -0.789) (angle -56) (layer F.SilkS) (width 0.12))
(fp_arc (start 0 0) (end 0.789 -1.484) (angle -56) (layer F.SilkS) (width 0.12))
(fp_arc (start 0 0) (end 1.484 0.789) (angle -56) (layer F.SilkS) (width 0.12))
(fp_arc (start 0 0) (end 0 1.68) (angle -28) (layer F.SilkS) (width 0.12))
(pad 3 thru_hole circle (at 10 0) (size 2.5 2.5) (drill 1.3) (layers *.Cu *.Mask)
(net 2 OPL))
(pad 2 thru_hole circle (at 5 0) (size 2.5 2.5) (drill 1.3) (layers *.Cu *.Mask)
(net 7 GND))
(pad 1 thru_hole rect (at 0 0) (size 2.5 2.5) (drill 1.3) (layers *.Cu *.Mask)
(net 3 OPR))
(model ${KISYS3DMOD}/TerminalBlock_MetzConnect.3dshapes/TerminalBlock_MetzConnect_Type055_RT01503HDWU_1x03_P5.00mm_Horizontal.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Potentiometer_THT:Potentiometer_Piher_PC-16_Dual_Horizontal locked (layer B.Cu) (tedit 5A3D4993) (tstamp 5DA63B8D)
(at 72.5 62.5 90)
(descr "Potentiometer, horizontal, Piher PC-16 Dual, http://www.piher-nacesa.com/pdf/20-PC16v03.pdf")
(tags "Potentiometer horizontal Piher PC-16 Dual")
(path /5DA5E082)
(fp_text reference VR2 (at 0 14.25 90) (layer B.SilkS)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text value "10k volume" (at 0 -4.25 90) (layer B.Fab)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text user %R (at -1.5 5 90) (layer B.Fab)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_line (start 31.75 13.25) (end -9.75 13.25) (layer B.CrtYd) (width 0.05))
(fp_line (start 31.75 -3.25) (end 31.75 13.25) (layer B.CrtYd) (width 0.05))
(fp_line (start -9.75 -3.25) (end 31.75 -3.25) (layer B.CrtYd) (width 0.05))
(fp_line (start -9.75 13.25) (end -9.75 -3.25) (layer B.CrtYd) (width 0.05))
(fp_line (start 31.62 8.12) (end 31.62 1.879) (layer B.SilkS) (width 0.12))
(fp_line (start 15.62 8.12) (end 15.62 1.879) (layer B.SilkS) (width 0.12))
(fp_line (start 15.62 1.879) (end 31.62 1.879) (layer B.SilkS) (width 0.12))
(fp_line (start 15.62 8.12) (end 31.62 8.12) (layer B.SilkS) (width 0.12))
(fp_line (start 15.62 10.12) (end 15.62 -0.12) (layer B.SilkS) (width 0.12))
(fp_line (start 6.62 10.12) (end 6.62 -0.12) (layer B.SilkS) (width 0.12))
(fp_line (start 6.62 -0.12) (end 15.62 -0.12) (layer B.SilkS) (width 0.12))
(fp_line (start 6.62 10.12) (end 15.62 10.12) (layer B.SilkS) (width 0.12))
(fp_line (start 6.62 13.12) (end 6.62 -3.12) (layer B.SilkS) (width 0.12))
(fp_line (start -9.62 13.12) (end -9.62 -3.12) (layer B.SilkS) (width 0.12))
(fp_line (start -9.62 -3.12) (end 6.62 -3.12) (layer B.SilkS) (width 0.12))
(fp_line (start -9.62 13.12) (end 6.62 13.12) (layer B.SilkS) (width 0.12))
(fp_line (start 31.5 8) (end 15.5 8) (layer B.Fab) (width 0.1))
(fp_line (start 31.5 2) (end 31.5 8) (layer B.Fab) (width 0.1))
(fp_line (start 15.5 2) (end 31.5 2) (layer B.Fab) (width 0.1))
(fp_line (start 15.5 8) (end 15.5 2) (layer B.Fab) (width 0.1))
(fp_line (start 15.5 10) (end 6.5 10) (layer B.Fab) (width 0.1))
(fp_line (start 15.5 0) (end 15.5 10) (layer B.Fab) (width 0.1))
(fp_line (start 6.5 0) (end 15.5 0) (layer B.Fab) (width 0.1))
(fp_line (start 6.5 10) (end 6.5 0) (layer B.Fab) (width 0.1))
(fp_line (start 6.5 13) (end -9.5 13) (layer B.Fab) (width 0.1))
(fp_line (start 6.5 -3) (end 6.5 13) (layer B.Fab) (width 0.1))
(fp_line (start -9.5 -3) (end 6.5 -3) (layer B.Fab) (width 0.1))
(fp_line (start -9.5 13) (end -9.5 -3) (layer B.Fab) (width 0.1))
(pad 4 thru_hole circle (at -7.5 0 90) (size 2.34 2.34) (drill 1.3) (layers *.Cu *.Mask)
(net 7 GND))
(pad 5 thru_hole circle (at -7.5 5 90) (size 2.34 2.34) (drill 1.3) (layers *.Cu *.Mask)
(net 22 "Net-(J5-Pad2)"))
(pad 6 thru_hole circle (at -7.5 10 90) (size 2.34 2.34) (drill 1.3) (layers *.Cu *.Mask)
(net 20 "Net-(R14-Pad1)"))
(pad 1 thru_hole circle (at 0 0 90) (size 2.34 2.34) (drill 1.3) (layers *.Cu *.Mask)
(net 7 GND))
(pad 2 thru_hole circle (at 0 5 90) (size 2.34 2.34) (drill 1.3) (layers *.Cu *.Mask)
(net 14 "Net-(J4-Pad2)"))
(pad 3 thru_hole circle (at 0 10 90) (size 2.34 2.34) (drill 1.3) (layers *.Cu *.Mask)
(net 21 "Net-(R15-Pad1)"))
(model ${KISYS3DMOD}/Potentiometer_THT.3dshapes/Potentiometer_Piher_PC-16_Dual_Horizontal.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Resistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_Horizontal (layer F.Cu) (tedit 5AE5139B) (tstamp 5DA63B66)
(at 82.5 75 270)
(descr "Resistor, Axial_DIN0411 series, Axial, Horizontal, pin pitch=12.7mm, 1W, length*diameter=9.9*3.6mm^2")
(tags "Resistor Axial_DIN0411 series Axial Horizontal pin pitch 12.7mm 1W length 9.9mm diameter 3.6mm")
(path /5DA60795)
(fp_text reference R15 (at 6.35 -2.92 90) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 1.5k (at 6.35 2.92 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 6.35 0 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 14.15 -2.05) (end -1.45 -2.05) (layer F.CrtYd) (width 0.05))
(fp_line (start 14.15 2.05) (end 14.15 -2.05) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.45 2.05) (end 14.15 2.05) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.45 -2.05) (end -1.45 2.05) (layer F.CrtYd) (width 0.05))
(fp_line (start 11.42 1.92) (end 11.42 1.44) (layer F.SilkS) (width 0.12))
(fp_line (start 1.28 1.92) (end 11.42 1.92) (layer F.SilkS) (width 0.12))
(fp_line (start 1.28 1.44) (end 1.28 1.92) (layer F.SilkS) (width 0.12))
(fp_line (start 11.42 -1.92) (end 11.42 -1.44) (layer F.SilkS) (width 0.12))
(fp_line (start 1.28 -1.92) (end 11.42 -1.92) (layer F.SilkS) (width 0.12))
(fp_line (start 1.28 -1.44) (end 1.28 -1.92) (layer F.SilkS) (width 0.12))
(fp_line (start 12.7 0) (end 11.3 0) (layer F.Fab) (width 0.1))
(fp_line (start 0 0) (end 1.4 0) (layer F.Fab) (width 0.1))
(fp_line (start 11.3 -1.8) (end 1.4 -1.8) (layer F.Fab) (width 0.1))
(fp_line (start 11.3 1.8) (end 11.3 -1.8) (layer F.Fab) (width 0.1))
(fp_line (start 1.4 1.8) (end 11.3 1.8) (layer F.Fab) (width 0.1))
(fp_line (start 1.4 -1.8) (end 1.4 1.8) (layer F.Fab) (width 0.1))
(pad 2 thru_hole oval (at 12.7 0 270) (size 2.4 2.4) (drill 1.2) (layers *.Cu *.Mask)
(net 2 OPL))
(pad 1 thru_hole circle (at 0 0 270) (size 2.4 2.4) (drill 1.2) (layers *.Cu *.Mask)
(net 21 "Net-(R15-Pad1)"))
(model ${KISYS3DMOD}/Resistor_THT.3dshapes/R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_Horizontal.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Resistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_Horizontal (layer F.Cu) (tedit 5AE5139B) (tstamp 5DA63B4F)
(at 75.5 75 270)
(descr "Resistor, Axial_DIN0411 series, Axial, Horizontal, pin pitch=12.7mm, 1W, length*diameter=9.9*3.6mm^2")
(tags "Resistor Axial_DIN0411 series Axial Horizontal pin pitch 12.7mm 1W length 9.9mm diameter 3.6mm")
(path /5DA5FB60)
(fp_text reference R14 (at 6.35 -2.92 90) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 1.5k (at 6.35 2.92 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 6.35 0 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 14.15 -2.05) (end -1.45 -2.05) (layer F.CrtYd) (width 0.05))
(fp_line (start 14.15 2.05) (end 14.15 -2.05) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.45 2.05) (end 14.15 2.05) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.45 -2.05) (end -1.45 2.05) (layer F.CrtYd) (width 0.05))
(fp_line (start 11.42 1.92) (end 11.42 1.44) (layer F.SilkS) (width 0.12))
(fp_line (start 1.28 1.92) (end 11.42 1.92) (layer F.SilkS) (width 0.12))
(fp_line (start 1.28 1.44) (end 1.28 1.92) (layer F.SilkS) (width 0.12))
(fp_line (start 11.42 -1.92) (end 11.42 -1.44) (layer F.SilkS) (width 0.12))
(fp_line (start 1.28 -1.92) (end 11.42 -1.92) (layer F.SilkS) (width 0.12))
(fp_line (start 1.28 -1.44) (end 1.28 -1.92) (layer F.SilkS) (width 0.12))
(fp_line (start 12.7 0) (end 11.3 0) (layer F.Fab) (width 0.1))
(fp_line (start 0 0) (end 1.4 0) (layer F.Fab) (width 0.1))
(fp_line (start 11.3 -1.8) (end 1.4 -1.8) (layer F.Fab) (width 0.1))
(fp_line (start 11.3 1.8) (end 11.3 -1.8) (layer F.Fab) (width 0.1))
(fp_line (start 1.4 1.8) (end 11.3 1.8) (layer F.Fab) (width 0.1))
(fp_line (start 1.4 -1.8) (end 1.4 1.8) (layer F.Fab) (width 0.1))
(pad 2 thru_hole oval (at 12.7 0 270) (size 2.4 2.4) (drill 1.2) (layers *.Cu *.Mask)
(net 3 OPR))
(pad 1 thru_hole circle (at 0 0 270) (size 2.4 2.4) (drill 1.2) (layers *.Cu *.Mask)
(net 20 "Net-(R14-Pad1)"))
(model ${KISYS3DMOD}/Resistor_THT.3dshapes/R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_Horizontal.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Resistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_Horizontal (layer F.Cu) (tedit 5AE5139B) (tstamp 5DA63B38)
(at 134 90.5)
(descr "Resistor, Axial_DIN0411 series, Axial, Horizontal, pin pitch=12.7mm, 1W, length*diameter=9.9*3.6mm^2")
(tags "Resistor Axial_DIN0411 series Axial Horizontal pin pitch 12.7mm 1W length 9.9mm diameter 3.6mm")
(path /5DA61983)
(fp_text reference R13 (at 6.35 -2.92) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 560 (at 6.35 2.92) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 6.35 0) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 14.15 -2.05) (end -1.45 -2.05) (layer F.CrtYd) (width 0.05))
(fp_line (start 14.15 2.05) (end 14.15 -2.05) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.45 2.05) (end 14.15 2.05) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.45 -2.05) (end -1.45 2.05) (layer F.CrtYd) (width 0.05))
(fp_line (start 11.42 1.92) (end 11.42 1.44) (layer F.SilkS) (width 0.12))
(fp_line (start 1.28 1.92) (end 11.42 1.92) (layer F.SilkS) (width 0.12))
(fp_line (start 1.28 1.44) (end 1.28 1.92) (layer F.SilkS) (width 0.12))
(fp_line (start 11.42 -1.92) (end 11.42 -1.44) (layer F.SilkS) (width 0.12))
(fp_line (start 1.28 -1.92) (end 11.42 -1.92) (layer F.SilkS) (width 0.12))
(fp_line (start 1.28 -1.44) (end 1.28 -1.92) (layer F.SilkS) (width 0.12))
(fp_line (start 12.7 0) (end 11.3 0) (layer F.Fab) (width 0.1))
(fp_line (start 0 0) (end 1.4 0) (layer F.Fab) (width 0.1))
(fp_line (start 11.3 -1.8) (end 1.4 -1.8) (layer F.Fab) (width 0.1))
(fp_line (start 11.3 1.8) (end 11.3 -1.8) (layer F.Fab) (width 0.1))
(fp_line (start 1.4 1.8) (end 11.3 1.8) (layer F.Fab) (width 0.1))
(fp_line (start 1.4 -1.8) (end 1.4 1.8) (layer F.Fab) (width 0.1))
(pad 2 thru_hole oval (at 12.7 0) (size 2.4 2.4) (drill 1.2) (layers *.Cu *.Mask)
(net 26 "Net-(J6-Pad1)"))
(pad 1 thru_hole circle (at 0 0) (size 2.4 2.4) (drill 1.2) (layers *.Cu *.Mask)
(net 27 "Net-(J6-Pad4)"))
(model ${KISYS3DMOD}/Resistor_THT.3dshapes/R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_Horizontal.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Resistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_Horizontal (layer F.Cu) (tedit 5AE5139B) (tstamp 5DA63B21)
(at 125.65 88 270)
(descr "Resistor, Axial_DIN0411 series, Axial, Horizontal, pin pitch=12.7mm, 1W, length*diameter=9.9*3.6mm^2")
(tags "Resistor Axial_DIN0411 series Axial Horizontal pin pitch 12.7mm 1W length 9.9mm diameter 3.6mm")
(path /5DA611B2)
(fp_text reference R12 (at 6.35 -2.92 90) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 2.2k (at 6.35 2.92 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 6.35 0 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 14.15 -2.05) (end -1.45 -2.05) (layer F.CrtYd) (width 0.05))
(fp_line (start 14.15 2.05) (end 14.15 -2.05) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.45 2.05) (end 14.15 2.05) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.45 -2.05) (end -1.45 2.05) (layer F.CrtYd) (width 0.05))
(fp_line (start 11.42 1.92) (end 11.42 1.44) (layer F.SilkS) (width 0.12))
(fp_line (start 1.28 1.92) (end 11.42 1.92) (layer F.SilkS) (width 0.12))
(fp_line (start 1.28 1.44) (end 1.28 1.92) (layer F.SilkS) (width 0.12))
(fp_line (start 11.42 -1.92) (end 11.42 -1.44) (layer F.SilkS) (width 0.12))
(fp_line (start 1.28 -1.92) (end 11.42 -1.92) (layer F.SilkS) (width 0.12))
(fp_line (start 1.28 -1.44) (end 1.28 -1.92) (layer F.SilkS) (width 0.12))
(fp_line (start 12.7 0) (end 11.3 0) (layer F.Fab) (width 0.1))
(fp_line (start 0 0) (end 1.4 0) (layer F.Fab) (width 0.1))
(fp_line (start 11.3 -1.8) (end 1.4 -1.8) (layer F.Fab) (width 0.1))
(fp_line (start 11.3 1.8) (end 11.3 -1.8) (layer F.Fab) (width 0.1))
(fp_line (start 1.4 1.8) (end 11.3 1.8) (layer F.Fab) (width 0.1))
(fp_line (start 1.4 -1.8) (end 1.4 1.8) (layer F.Fab) (width 0.1))
(pad 2 thru_hole oval (at 12.7 0 270) (size 2.4 2.4) (drill 1.2) (layers *.Cu *.Mask)
(net 7 GND))
(pad 1 thru_hole circle (at 0 0 270) (size 2.4 2.4) (drill 1.2) (layers *.Cu *.Mask)
(net 6 OAL))
(model ${KISYS3DMOD}/Resistor_THT.3dshapes/R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_Horizontal.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Resistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_Horizontal (layer F.Cu) (tedit 5AE5139B) (tstamp 5DA63B0A)
(at 134 97.5)
(descr "Resistor, Axial_DIN0411 series, Axial, Horizontal, pin pitch=12.7mm, 1W, length*diameter=9.9*3.6mm^2")
(tags "Resistor Axial_DIN0411 series Axial Horizontal pin pitch 12.7mm 1W length 9.9mm diameter 3.6mm")
(path /5DA61404)
(fp_text reference R11 (at 6.35 -2.92) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 560 (at 6.35 2.92) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 6.35 0) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 14.15 -2.05) (end -1.45 -2.05) (layer F.CrtYd) (width 0.05))
(fp_line (start 14.15 2.05) (end 14.15 -2.05) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.45 2.05) (end 14.15 2.05) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.45 -2.05) (end -1.45 2.05) (layer F.CrtYd) (width 0.05))
(fp_line (start 11.42 1.92) (end 11.42 1.44) (layer F.SilkS) (width 0.12))
(fp_line (start 1.28 1.92) (end 11.42 1.92) (layer F.SilkS) (width 0.12))
(fp_line (start 1.28 1.44) (end 1.28 1.92) (layer F.SilkS) (width 0.12))
(fp_line (start 11.42 -1.92) (end 11.42 -1.44) (layer F.SilkS) (width 0.12))
(fp_line (start 1.28 -1.92) (end 11.42 -1.92) (layer F.SilkS) (width 0.12))
(fp_line (start 1.28 -1.44) (end 1.28 -1.92) (layer F.SilkS) (width 0.12))
(fp_line (start 12.7 0) (end 11.3 0) (layer F.Fab) (width 0.1))
(fp_line (start 0 0) (end 1.4 0) (layer F.Fab) (width 0.1))
(fp_line (start 11.3 -1.8) (end 1.4 -1.8) (layer F.Fab) (width 0.1))
(fp_line (start 11.3 1.8) (end 11.3 -1.8) (layer F.Fab) (width 0.1))
(fp_line (start 1.4 1.8) (end 11.3 1.8) (layer F.Fab) (width 0.1))
(fp_line (start 1.4 -1.8) (end 1.4 1.8) (layer F.Fab) (width 0.1))
(pad 2 thru_hole oval (at 12.7 0) (size 2.4 2.4) (drill 1.2) (layers *.Cu *.Mask)
(net 29 "Net-(J6-Pad8)"))
(pad 1 thru_hole circle (at 0 0) (size 2.4 2.4) (drill 1.2) (layers *.Cu *.Mask)
(net 28 "Net-(J6-Pad5)"))
(model ${KISYS3DMOD}/Resistor_THT.3dshapes/R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_Horizontal.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Resistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_Horizontal (layer F.Cu) (tedit 5AE5139B) (tstamp 5DA63AF3)
(at 119.4 88.05 270)
(descr "Resistor, Axial_DIN0411 series, Axial, Horizontal, pin pitch=12.7mm, 1W, length*diameter=9.9*3.6mm^2")
(tags "Resistor Axial_DIN0411 series Axial Horizontal pin pitch 12.7mm 1W length 9.9mm diameter 3.6mm")
(path /5DA60BCA)
(fp_text reference R10 (at 6.35 -2.92 90) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 2.2k (at 6.35 2.92 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 6.35 0 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 14.15 -2.05) (end -1.45 -2.05) (layer F.CrtYd) (width 0.05))
(fp_line (start 14.15 2.05) (end 14.15 -2.05) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.45 2.05) (end 14.15 2.05) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.45 -2.05) (end -1.45 2.05) (layer F.CrtYd) (width 0.05))
(fp_line (start 11.42 1.92) (end 11.42 1.44) (layer F.SilkS) (width 0.12))
(fp_line (start 1.28 1.92) (end 11.42 1.92) (layer F.SilkS) (width 0.12))
(fp_line (start 1.28 1.44) (end 1.28 1.92) (layer F.SilkS) (width 0.12))
(fp_line (start 11.42 -1.92) (end 11.42 -1.44) (layer F.SilkS) (width 0.12))
(fp_line (start 1.28 -1.92) (end 11.42 -1.92) (layer F.SilkS) (width 0.12))
(fp_line (start 1.28 -1.44) (end 1.28 -1.92) (layer F.SilkS) (width 0.12))
(fp_line (start 12.7 0) (end 11.3 0) (layer F.Fab) (width 0.1))
(fp_line (start 0 0) (end 1.4 0) (layer F.Fab) (width 0.1))
(fp_line (start 11.3 -1.8) (end 1.4 -1.8) (layer F.Fab) (width 0.1))
(fp_line (start 11.3 1.8) (end 11.3 -1.8) (layer F.Fab) (width 0.1))
(fp_line (start 1.4 1.8) (end 11.3 1.8) (layer F.Fab) (width 0.1))
(fp_line (start 1.4 -1.8) (end 1.4 1.8) (layer F.Fab) (width 0.1))
(pad 2 thru_hole oval (at 12.7 0 270) (size 2.4 2.4) (drill 1.2) (layers *.Cu *.Mask)
(net 7 GND))
(pad 1 thru_hole circle (at 0 0 270) (size 2.4 2.4) (drill 1.2) (layers *.Cu *.Mask)
(net 1 OAD))
(model ${KISYS3DMOD}/Resistor_THT.3dshapes/R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_Horizontal.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(gr_text "MIDR\n\nMIDL\n\nOAL" (at 103 91.071429 90) (layer F.SilkS)
(effects (font (size 1.5 1.5) (thickness 0.3)))
)
(gr_text "410CST1582\nELKA PCB\nreplica" (at 67.5 83.5) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(gr_text volume (at 66.5 74) (layer F.SilkS)
(effects (font (size 2 2) (thickness 0.15)))
)
(gr_text left (at 97.1 83.8) (layer F.SilkS)
(effects (font (size 2 2) (thickness 0.15)))
)
(gr_text right (at 117.4 83.6) (layer F.SilkS)
(effects (font (size 2 2) (thickness 0.15)))
)
(gr_text headphone (at 137.1 83.6) (layer F.SilkS)
(effects (font (size 2 2) (thickness 0.15)))
)
(gr_line (start 69.375 55.875) (end 162.075 55.875) (layer Dwgs.User) (width 0.15))
(gr_text "GND\n\nGND\n\nOAD" (at 87 91.5 90) (layer F.SilkS) (tstamp 5DA67692)
(effects (font (size 1.5 1.5) (thickness 0.3)))
)
(gr_text "OPR\n\nGND\n\nOPL" (at 70 91.5 90) (layer F.SilkS) (tstamp 5DA67695)
(effects (font (size 1.5 1.5) (thickness 0.3)))
)
(gr_text "back of the instrument" (at 111.5 25) (layer Cmts.User)
(effects (font (size 5 5) (thickness 0.15)))
)
(gr_line (start 152.4 103.4) (end 60 103.4) (layer Edge.Cuts) (width 0.05) (tstamp 5DA637AB))
(gr_line (start 152.4 60) (end 152.4 103.4) (layer Edge.Cuts) (width 0.05))
(gr_line (start 60 60) (end 60 103.4) (layer Edge.Cuts) (width 0.05))
(gr_line (start 60 60) (end 152.4 60) (layer Edge.Cuts) (width 0.05))
(segment (start 128.600001 72.174999) (end 127.325001 72.174999) (width 0.25) (layer F.Cu) (net 1))
(segment (start 130.1 70.675) (end 128.600001 72.174999) (width 0.25) (layer F.Cu) (net 1))
(segment (start 121.725001 85.724999) (end 120.599999 86.850001) (width 0.25) (layer F.Cu) (net 1))
(segment (start 121.725001 77.774999) (end 121.725001 85.724999) (width 0.25) (layer F.Cu) (net 1))
(segment (start 120.599999 86.850001) (end 119.4 88.05) (width 0.25) (layer F.Cu) (net 1))
(segment (start 127.325001 72.174999) (end 121.725001 77.774999) (width 0.25) (layer F.Cu) (net 1))
(segment (start 119.4 88.05) (end 114 93.45) (width 0.25) (layer F.Cu) (net 1))
(segment (start 96.55 93.45) (end 91.5 98.5) (width 0.25) (layer F.Cu) (net 1))
(segment (start 114 93.45) (end 96.55 93.45) (width 0.25) (layer F.Cu) (net 1))
(segment (start 82.5 91) (end 75 98.5) (width 0.25) (layer F.Cu) (net 2))
(segment (start 82.5 87.7) (end 82.5 91) (width 0.25) (layer F.Cu) (net 2))
(segment (start 65 98.2) (end 65 98.5) (width 0.25) (layer F.Cu) (net 3))
(segment (start 75.5 87.7) (end 65 98.2) (width 0.25) (layer F.Cu) (net 3))
(segment (start 127.824989 77.212599) (end 127.824989 83.175011) (width 0.25) (layer F.Cu) (net 4))
(segment (start 129.037598 75.99999) (end 127.824989 77.212599) (width 0.25) (layer F.Cu) (net 4))
(segment (start 136.896331 75.999989) (end 129.037598 75.99999) (width 0.25) (layer F.Cu) (net 4))
(segment (start 114.5 96.5) (end 105 96.5) (width 0.25) (layer F.Cu) (net 4))
(segment (start 127.824989 83.175011) (end 114.5 96.5) (width 0.25) (layer F.Cu) (net 4))
(segment (start 140.1 72.79632) (end 136.896331 75.999989) (width 0.25) (layer F.Cu) (net 4))
(segment (start 105 96.5) (end 103 98.5) (width 0.25) (layer F.Cu) (net 4))
(segment (start 140.1 70.675) (end 140.1 72.79632) (width 0.25) (layer F.Cu) (net 4))
(segment (start 98 97) (end 98 98.5) (width 0.25) (layer F.Cu) (net 5))
(segment (start 127.374979 82.988611) (end 115.86359 94.5) (width 0.25) (layer F.Cu) (net 5))
(segment (start 128.901178 75.5) (end 127.374979 77.026199) (width 0.25) (layer F.Cu) (net 5))
(segment (start 115.86359 94.5) (end 100.5 94.5) (width 0.25) (layer F.Cu) (net 5))
(segment (start 130.275 75.5) (end 128.901178 75.5) (width 0.25) (layer F.Cu) (net 5))
(segment (start 100.5 94.5) (end 98 97) (width 0.25) (layer F.Cu) (net 5))
(segment (start 127.374979 77.026199) (end 127.374979 82.988611) (width 0.25) (layer F.Cu) (net 5))
(segment (start 135.1 70.675) (end 130.275 75.5) (width 0.25) (layer F.Cu) (net 5))
(segment (start 128.274999 77.398999) (end 128.274999 85.375001) (width 0.25) (layer F.Cu) (net 6))
(segment (start 129.223999 76.449999) (end 128.274999 77.398999) (width 0.25) (layer F.Cu) (net 6))
(segment (start 128.274999 85.375001) (end 125.65 88) (width 0.25) (layer F.Cu) (net 6))
(segment (start 139.325001 76.449999) (end 129.223999 76.449999) (width 0.25) (layer F.Cu) (net 6))
(segment (start 145.1 70.675) (end 139.325001 76.449999) (width 0.25) (layer F.Cu) (net 6))
(segment (start 115.15 98.5) (end 108 98.5) (width 0.25) (layer F.Cu) (net 6))
(segment (start 125.65 88) (end 115.15 98.5) (width 0.25) (layer F.Cu) (net 6))
(segment (start 97.4 62.875) (end 117.4 62.875) (width 0.5) (layer F.Cu) (net 7))
(segment (start 117.4 62.875) (end 137.6 62.875) (width 0.5) (layer F.Cu) (net 7))
(segment (start 137.6 62.875) (end 142.875 62.875) (width 0.5) (layer F.Cu) (net 7))
(segment (start 142.875 62.875) (end 150 70) (width 0.5) (layer F.Cu) (net 7))
(segment (start 150 70) (end 150 99) (width 0.5) (layer F.Cu) (net 7))
(segment (start 148.3 100.7) (end 125.65 100.7) (width 0.5) (layer F.Cu) (net 7))
(segment (start 150 99) (end 148.3 100.7) (width 0.5) (layer F.Cu) (net 7))
(segment (start 119.45 100.7) (end 119.4 100.75) (width 0.5) (layer F.Cu) (net 7))
(segment (start 125.65 100.7) (end 119.45 100.7) (width 0.5) (layer F.Cu) (net 7))
(segment (start 88.75 100.75) (end 119.4 100.75) (width 0.5) (layer F.Cu) (net 7))
(segment (start 86.5 98.5) (end 88.75 100.75) (width 0.5) (layer F.Cu) (net 7))
(segment (start 81.5 100.25) (end 82 100.75) (width 0.5) (layer F.Cu) (net 7))
(segment (start 81.5 98.5) (end 81.5 100.25) (width 0.5) (layer F.Cu) (net 7))
(segment (start 72.5 101) (end 82 101) (width 0.5) (layer F.Cu) (net 7))
(segment (start 82 101) (end 82.25 100.75) (width 0.5) (layer F.Cu) (net 7))
(segment (start 82.25 100.75) (end 88.75 100.75) (width 0.5) (layer F.Cu) (net 7))
(segment (start 70 98.5) (end 72.5 101) (width 0.5) (layer F.Cu) (net 7))
(segment (start 82 100.75) (end 82.25 100.75) (width 0.5) (layer F.Cu) (net 7))
(segment (start 72.5 62.5) (end 72.5 70) (width 0.5) (layer F.Cu) (net 7))
(segment (start 63.5 101) (end 72.5 101) (width 0.5) (layer F.Cu) (net 7))
(segment (start 61 98.5) (end 63.5 101) (width 0.5) (layer F.Cu) (net 7))
(segment (start 61 81.5) (end 61 98.5) (width 0.5) (layer F.Cu) (net 7))
(segment (start 72.5 70) (end 61 81.5) (width 0.5) (layer F.Cu) (net 7))
(segment (start 77.5 62.5) (end 79.5 60.5) (width 0.25) (layer F.Cu) (net 14))
(segment (start 79.5 60.5) (end 90 60.5) (width 0.25) (layer F.Cu) (net 14))
(segment (start 90 60.5) (end 96.5 67) (width 0.25) (layer F.Cu) (net 14))
(segment (start 101.225 67) (end 104.9 70.675) (width 0.25) (layer F.Cu) (net 14))
(segment (start 96.5 67) (end 101.225 67) (width 0.25) (layer F.Cu) (net 14))
(segment (start 80.5 70) (end 75.5 75) (width 0.25) (layer F.Cu) (net 20))
(segment (start 82.5 70) (end 80.5 70) (width 0.25) (layer F.Cu) (net 20))
(segment (start 82.5 62.5) (end 85 65) (width 0.25) (layer F.Cu) (net 21))
(segment (start 85 72.5) (end 82.5 75) (width 0.25) (layer F.Cu) (net 21))
(segment (start 85 65) (end 85 72.5) (width 0.25) (layer F.Cu) (net 21))
(segment (start 120.575 75) (end 124.9 70.675) (width 0.25) (layer F.Cu) (net 22))
(segment (start 98.074999 70.074999) (end 98.074999 72.074999) (width 0.25) (layer F.Cu) (net 22))
(segment (start 89 61) (end 98.074999 70.074999) (width 0.25) (layer F.Cu) (net 22))
(segment (start 101 75) (end 120.575 75) (width 0.25) (layer F.Cu) (net 22))
(segment (start 77.5 70) (end 78.669999 68.830001) (width 0.25) (layer F.Cu) (net 22))
(segment (start 78.669999 68.830001) (end 78.669999 64.117399) (width 0.25) (layer F.Cu) (net 22))
(segment (start 81.787398 61) (end 89 61) (width 0.25) (layer F.Cu) (net 22))
(segment (start 98.074999 72.074999) (end 101 75) (width 0.25) (layer F.Cu) (net 22))
(segment (start 78.669999 64.117399) (end 81.787398 61) (width 0.25) (layer F.Cu) (net 22))
(segment (start 145.1 88.9) (end 146.7 90.5) (width 0.25) (layer F.Cu) (net 26))
(segment (start 145.1 78.275) (end 145.1 88.9) (width 0.25) (layer F.Cu) (net 26))
(segment (start 140.1 84.4) (end 134 90.5) (width 0.25) (layer F.Cu) (net 27))
(segment (start 140.1 78.275) (end 140.1 84.4) (width 0.25) (layer F.Cu) (net 27))
(segment (start 130.1 93.6) (end 130.1 78.275) (width 0.25) (layer F.Cu) (net 28))
(segment (start 134 97.5) (end 130.1 93.6) (width 0.25) (layer F.Cu) (net 28))
(segment (start 143.2 94) (end 146.7 97.5) (width 0.25) (layer F.Cu) (net 29))
(segment (start 135.1 84.9) (end 132 88) (width 0.25) (layer F.Cu) (net 29))
(segment (start 133.5 94) (end 143.2 94) (width 0.25) (layer F.Cu) (net 29))
(segment (start 132 92.5) (end 133.5 94) (width 0.25) (layer F.Cu) (net 29))
(segment (start 132 88) (end 132 92.5) (width 0.25) (layer F.Cu) (net 29))
(segment (start 135.1 78.275) (end 135.1 84.9) (width 0.25) (layer F.Cu) (net 29))
)

252
410CST1582/410CST1582.net

@ -0,0 +1,252 @@
(export (version D)
(design
(source /Users/dashie/Seafile/dev/kicad/elka/410CST1582/410CST1582.sch)
(date "Tuesday, 15 October 2019 at 19:18:51")
(tool "Eeschema (5.1.2-1)-1")
(sheet (number 1) (name /) (tstamps /)
(title_block
(title)
(company)
(rev)
(date)
(source 410CST1582.sch)
(comment (number 1) (value ""))
(comment (number 2) (value ""))
(comment (number 3) (value ""))
(comment (number 4) (value "")))))
(components
(comp (ref VR2)
(value "10k volume")
(footprint Potentiometer_THT:Potentiometer_Piher_PC-16_Dual_Horizontal)
(datasheet ~)
(libsource (lib Device) (part R_POT_Dual) (description "Dual potentiometer"))
(sheetpath (names /) (tstamps /))
(tstamp 5DA5E082))
(comp (ref R14)
(value 1.5k)
(footprint Resistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_Horizontal)
(datasheet ~)
(libsource (lib Device) (part R) (description Resistor))
(sheetpath (names /) (tstamps /))
(tstamp 5DA5FB60))
(comp (ref R15)
(value 1.5k)
(footprint Resistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_Horizontal)
(datasheet ~)
(libsource (lib Device) (part R) (description Resistor))
(sheetpath (names /) (tstamps /))
(tstamp 5DA60795))
(comp (ref R10)
(value 2.2k)
(footprint Resistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_Horizontal)
(datasheet ~)
(libsource (lib Device) (part R) (description Resistor))
(sheetpath (names /) (tstamps /))
(tstamp 5DA60BCA))
(comp (ref R12)
(value 2.2k)
(footprint Resistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_Horizontal)
(datasheet ~)
(libsource (lib Device) (part R) (description Resistor))
(sheetpath (names /) (tstamps /))
(tstamp 5DA611B2))
(comp (ref R11)
(value 560)
(footprint Resistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_Horizontal)
(datasheet ~)
(libsource (lib Device) (part R) (description Resistor))
(sheetpath (names /) (tstamps /))
(tstamp 5DA61404))
(comp (ref R13)
(value 560)
(footprint Resistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_Horizontal)
(datasheet ~)
(libsource (lib Device) (part R) (description Resistor))
(sheetpath (names /) (tstamps /))
(tstamp 5DA61983))
(comp (ref J1)
(value Screw_Terminal_01x03)
(footprint TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type055_RT01503HDWU_1x03_P5.00mm_Horizontal)
(datasheet ~)
(libsource (lib Connector) (part Screw_Terminal_01x03) (description "Generic screw terminal, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/)"))
(sheetpath (names /) (tstamps /))
(tstamp 5DA61FDD))
(comp (ref J3)
(value Screw_Terminal_01x03)
(footprint TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type055_RT01503HDWU_1x03_P5.00mm_Horizontal)
(datasheet ~)
(libsource (lib Connector) (part Screw_Terminal_01x03) (description "Generic screw terminal, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/)"))
(sheetpath (names /) (tstamps /))
(tstamp 5DA643EF))
(comp (ref J4)
(value left)
(footprint d_connectors:MJ-188LP-8)
(datasheet https://www.farnell.com/datasheets/21845.pdf)
(libsource (lib 410CST1582-rescue) (part MJ-188LP-8-d_connectors) (description ""))
(sheetpath (names /) (tstamps /))
(tstamp 5DA5DDC7))
(comp (ref J5)
(value right)
(footprint d_connectors:MJ-188LP-8)
(datasheet https://www.farnell.com/datasheets/21845.pdf)
(libsource (lib 410CST1582-rescue) (part MJ-188LP-8-d_connectors) (description ""))
(sheetpath (names /) (tstamps /))
(tstamp 5DA5E8EF))
(comp (ref J6)
(value headphone)
(footprint d_connectors:MJ-188LP-8)
(datasheet https://www.farnell.com/datasheets/21845.pdf)
(libsource (lib 410CST1582-rescue) (part MJ-188LP-8-d_connectors) (description ""))
(sheetpath (names /) (tstamps /))
(tstamp 5DA5F0F3))
(comp (ref J2)
(value Screw_Terminal_01x03)
(footprint TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type055_RT01503HDWU_1x03_P5.00mm_Horizontal)
(datasheet ~)
(libsource (lib Connector) (part Screw_Terminal_01x03) (description "Generic screw terminal, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/)"))
(sheetpath (names /) (tstamps /))
(tstamp 5DA8D91A)))
(libparts
(libpart (lib 410CST1582-rescue) (part MJ-188LP-8-d_connectors)
(fields
(field (name Reference) J)
(field (name Value) MJ-188LP-8-d_connectors))
(pins
(pin (num 1) (name ~) (type BiDi))
(pin (num 2) (name ~) (type BiDi))
(pin (num 3) (name ~) (type BiDi))
(pin (num 4) (name ~) (type BiDi))
(pin (num 5) (name ~) (type BiDi))
(pin (num 6) (name ~) (type BiDi))
(pin (num 7) (name ~) (type BiDi))
(pin (num 8) (name ~) (type BiDi))
(pin (num 9) (name gnd) (type input))))
(libpart (lib Connector) (part Screw_Terminal_01x03)
(description "Generic screw terminal, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/)")
(docs ~)
(footprints
(fp TerminalBlock*:*))
(fields
(field (name Reference) J)
(field (name Value) Screw_Terminal_01x03))
(pins
(pin (num 1) (name Pin_1) (type passive))
(pin (num 2) (name Pin_2) (type passive))
(pin (num 3) (name Pin_3) (type passive))))
(libpart (lib Device) (part R)
(description Resistor)
(docs ~)
(footprints
(fp R_*))
(fields
(field (name Reference) R)
(field (name Value) R))
(pins
(pin (num 1) (name ~) (type passive))
(pin (num 2) (name ~) (type passive))))
(libpart (lib Device) (part R_POT_Dual)
(description "Dual potentiometer")
(docs ~)
(footprints
(fp Potentiometer*))
(fields
(field (name Reference) RV)
(field (name Value) R_POT_Dual))
(pins
(pin (num 1) (name 1) (type passive))
(pin (num 2) (name 2) (type passive))
(pin (num 3) (name 3) (type passive))
(pin (num 4) (name 4) (type passive))
(pin (num 5) (name 5) (type passive))
(pin (num 6) (name 6) (type passive)))))
(libraries
(library (logical 410CST1582-rescue)
(uri /Users/dashie/Seafile/dev/kicad/elka/410CST1582/410CST1582-rescue.lib))
(library (logical Connector)
(uri "/Library/Application Support/kicad/library/Connector.lib"))
(library (logical Device)
(uri "/Library/Application Support/kicad/library/Device.lib")))
(nets
(net (code 1) (name "Net-(J4-Pad2)")
(node (ref VR2) (pin 2))
(node (ref J4) (pin 2)))
(net (code 2) (name GND)
(node (ref VR2) (pin 1))
(node (ref VR2) (pin 4))
(node (ref J5) (pin 9))
(node (ref R10) (pin 2))
(node (ref R12) (pin 2))
(node (ref J1) (pin 2))
(node (ref J2) (pin 2))
(node (ref J2) (pin 1))
(node (ref J6) (pin 9))
(node (ref J4) (pin 9)))
(net (code 3) (name "Net-(R14-Pad1)")
(node (ref VR2) (pin 6))
(node (ref R14) (pin 1)))
(net (code 4) (name "Net-(R15-Pad1)")
(node (ref VR2) (pin 3))
(node (ref R15) (pin 1)))
(net (code 5) (name "Net-(J6-Pad5)")
(node (ref R11) (pin 1))
(node (ref J6) (pin 5)))
(net (code 6) (name OPR)
(node (ref J1) (pin 1))
(node (ref R14) (pin 2)))
(net (code 7) (name OPL)
(node (ref J1) (pin 3))
(node (ref R15) (pin 2)))
(net (code 8) (name "Net-(J4-Pad1)")
(node (ref J4) (pin 1)))
(net (code 9) (name "Net-(J4-Pad3)")
(node (ref J4) (pin 3)))
(net (code 10) (name "Net-(J4-Pad4)")
(node (ref J4) (pin 4)))
(net (code 11) (name "Net-(J4-Pad5)")
(node (ref J4) (pin 5)))
(net (code 12) (name "Net-(J4-Pad6)")
(node (ref J4) (pin 6)))
(net (code 13) (name "Net-(J4-Pad7)")
(node (ref J4) (pin 7)))
(net (code 14) (name "Net-(J4-Pad8)")
(node (ref J4) (pin 8)))
(net (code 15) (name "Net-(J5-Pad1)")
(node (ref J5) (pin 1)))
(net (code 16) (name "Net-(J5-Pad2)")
(node (ref VR2) (pin 5))
(node (ref J5) (pin 2)))
(net (code 17) (name "Net-(J5-Pad3)")
(node (ref J5) (pin 3)))
(net (code 18) (name "Net-(J5-Pad4)")
(node (ref J5) (pin 4)))
(net (code 19) (name "Net-(J5-Pad5)")
(node (ref J5) (pin 5)))
(net (code 20) (name "Net-(J5-Pad6)")
(node (ref J5) (pin 6)))
(net (code 21) (name "Net-(J5-Pad7)")
(node (ref J5) (pin 7)))
(net (code 22) (name "Net-(J5-Pad8)")
(node (ref J5) (pin 8)))
(net (code 23) (name "Net-(J6-Pad1)")
(node (ref R13) (pin 2))
(node (ref J6) (pin 1)))
(net (code 24) (name "Net-(J6-Pad4)")
(node (ref R13) (pin 1))
(node (ref J6) (pin 4)))
(net (code 25) (name "Net-(J6-Pad8)")
(node (ref R11) (pin 2))
(node (ref J6) (pin 8)))
(net (code 26) (name OAL)
(node (ref J3) (pin 3))
(node (ref J6) (pin 2))
(node (ref R12) (pin 1)))
(net (code 27) (name MIDL)
(node (ref J6) (pin 3))
(node (ref J3) (pin 2)))
(net (code 28) (name MIDR)
(node (ref J3) (pin 1))
(node (ref J6) (pin 7)))
(net (code 29) (name OAD)
(node (ref J2) (pin 3))
(node (ref R10) (pin 1))
(node (ref J6) (pin 6)))))

249
410CST1582/410CST1582.pro

@ -0,0 +1,249 @@
update=Tuesday, 15 October 2019 at 19:23:54
version=1
last_client=kicad
[general]
version=1
RootSch=
BoardNm=
[cvpcb]
version=1
NetIExt=net
[eeschema]
version=1
LibDir=
[eeschema/libraries]
[pcbnew]
version=1
PageLayoutDescrFile=
LastNetListRead=
CopperLayerCount=2
BoardThickness=1.6
AllowMicroVias=0
AllowBlindVias=0
RequireCourtyardDefinitions=0
ProhibitOverlappingCourtyards=1
MinTrackWidth=0.2
MinViaDiameter=0.4
MinViaDrill=0.3
MinMicroViaDiameter=0.2
MinMicroViaDrill=0.09999999999999999
MinHoleToHole=0.25
TrackWidth1=0.25
ViaDiameter1=0.8
ViaDrill1=0.4
dPairWidth1=0.2
dPairGap1=0.25
dPairViaGap1=0.25
SilkLineWidth=0.12
SilkTextSizeV=1
SilkTextSizeH=1
SilkTextSizeThickness=0.15
SilkTextItalic=0
SilkTextUpright=1
CopperLineWidth=0.2
CopperTextSizeV=1.5
CopperTextSizeH=1.5
CopperTextThickness=0.3
CopperTextItalic=0
CopperTextUpright=1
EdgeCutLineWidth=0.05
CourtyardLineWidth=0.05
OthersLineWidth=0.15
OthersTextSizeV=1
OthersTextSizeH=1
OthersTextSizeThickness=0.15
OthersTextItalic=0
OthersTextUpright=1
SolderMaskClearance=0.051
SolderMaskMinWidth=0.25
SolderPasteClearance=0
SolderPasteRatio=-0
[pcbnew/Layer.F.Cu]
Name=F.Cu
Type=0
Enabled=1
[pcbnew/Layer.In1.Cu]
Name=In1.Cu
Type=0
Enabled=0
[pcbnew/Layer.In2.Cu]
Name=In2.Cu
Type=0
Enabled=0
[pcbnew/Layer.In3.Cu]
Name=In3.Cu
Type=0
Enabled=0
[pcbnew/Layer.In4.Cu]
Name=In4.Cu
Type=0
Enabled=0
[pcbnew/Layer.In5.Cu]
Name=In5.Cu
Type=0
Enabled=0
[pcbnew/Layer.In6.Cu]
Name=In6.Cu
Type=0
Enabled=0
[pcbnew/Layer.In7.Cu]
Name=In7.Cu
Type=0
Enabled=0
[pcbnew/Layer.In8.Cu]
Name=In8.Cu
Type=0
Enabled=0
[pcbnew/Layer.In9.Cu]
Name=In9.Cu
Type=0
Enabled=0
[pcbnew/Layer.In10.Cu]
Name=In10.Cu
Type=0
Enabled=0
[pcbnew/Layer.In11.Cu]
Name=In11.Cu
Type=0
Enabled=0
[pcbnew/Layer.In12.Cu]
Name=In12.Cu
Type=0
Enabled=0
[pcbnew/Layer.In13.Cu]
Name=In13.Cu
Type=0
Enabled=0
[pcbnew/Layer.In14.Cu]
Name=In14.Cu
Type=0
Enabled=0
[pcbnew/Layer.In15.Cu]
Name=In15.Cu
Type=0
Enabled=0
[pcbnew/Layer.In16.Cu]
Name=In16.Cu
Type=0
Enabled=0
[pcbnew/Layer.In17.Cu]
Name=In17.Cu
Type=0
Enabled=0
[pcbnew/Layer.In18.Cu]
Name=In18.Cu
Type=0
Enabled=0
[pcbnew/Layer.In19.Cu]
Name=In19.Cu
Type=0
Enabled=0
[pcbnew/Layer.In20.Cu]
Name=In20.Cu
Type=0
Enabled=0
[pcbnew/Layer.In21.Cu]
Name=In21.Cu
Type=0
Enabled=0
[pcbnew/Layer.In22.Cu]
Name=In22.Cu
Type=0
Enabled=0
[pcbnew/Layer.In23.Cu]
Name=In23.Cu
Type=0
Enabled=0
[pcbnew/Layer.In24.Cu]
Name=In24.Cu
Type=0
Enabled=0
[pcbnew/Layer.In25.Cu]
Name=In25.Cu
Type=0
Enabled=0
[pcbnew/Layer.In26.Cu]
Name=In26.Cu
Type=0
Enabled=0
[pcbnew/Layer.In27.Cu]
Name=In27.Cu
Type=0
Enabled=0
[pcbnew/Layer.In28.Cu]
Name=In28.Cu
Type=0
Enabled=0
[pcbnew/Layer.In29.Cu]
Name=In29.Cu
Type=0
Enabled=0
[pcbnew/Layer.In30.Cu]
Name=In30.Cu
Type=0
Enabled=0
[pcbnew/Layer.B.Cu]
Name=B.Cu
Type=0
Enabled=1
[pcbnew/Layer.B.Adhes]
Enabled=1
[pcbnew/Layer.F.Adhes]
Enabled=1
[pcbnew/Layer.B.Paste]
Enabled=1
[pcbnew/Layer.F.Paste]
Enabled=1
[pcbnew/Layer.B.SilkS]
Enabled=1
[pcbnew/Layer.F.SilkS]
Enabled=1
[pcbnew/Layer.B.Mask]
Enabled=1
[pcbnew/Layer.F.Mask]
Enabled=1
[pcbnew/Layer.Dwgs.User]
Enabled=1
[pcbnew/Layer.Cmts.User]
Enabled=1
[pcbnew/Layer.Eco1.User]
Enabled=1
[pcbnew/Layer.Eco2.User]
Enabled=1
[pcbnew/Layer.Edge.Cuts]
Enabled=1
[pcbnew/Layer.Margin]
Enabled=1
[pcbnew/Layer.B.CrtYd]
Enabled=1
[pcbnew/Layer.F.CrtYd]
Enabled=1
[pcbnew/Layer.B.Fab]
Enabled=1
[pcbnew/Layer.F.Fab]
Enabled=1
[pcbnew/Layer.Rescue]
Enabled=0
[pcbnew/Netclasses]
[pcbnew/Netclasses/Default]
Name=Default
Clearance=0.2
TrackWidth=0.25
ViaDiameter=0.8
ViaDrill=0.4
uViaDiameter=0.3
uViaDrill=0.1
dPairWidth=0.2
dPairGap=0.25
dPairViaGap=0.25
[pcbnew/Netclasses/1]
Name=GND
Clearance=0.2
TrackWidth=0.5
ViaDiameter=0.8
ViaDrill=0.4
uViaDiameter=0.3
uViaDrill=0.1
dPairWidth=0.2
dPairGap=0.25
dPairViaGap=0.25

388
410CST1582/410CST1582.sch

@ -0,0 +1,388 @@
EESchema Schematic File Version 4
LIBS:410CST1582-cache
EELAYER 29 0
EELAYER END
$Descr A4 11693 8268
encoding utf-8
Sheet 1 1
Title ""
Date ""
Rev ""
Comp ""
Comment1 ""
Comment2 ""
Comment3 ""
Comment4 ""
$EndDescr
Text Notes 2550 4600 0 50 ~ 0
6PSI-10K Potentiometer shaft single turn 10kΩ 200mW THT 6mm plastic PIHER
Text Notes 2500 4750 0 50 ~ 0
MJ-188LP-8 - Connecteur audio pour téléphone, 3 Contact(s), Embase, 6.35 mm, Montage PCB
$Comp
L Device:R_POT_Dual VR2
U 1 1 5DA5E082
P 2250 3650
F 0 "VR2" H 2000 3400 50 0000 C CNN
F 1 "10k volume" H 2000 3300 50 0000 C CNN
F 2 "Potentiometer_THT:Potentiometer_Piher_PC-16_Dual_Horizontal" H 2500 3575 50 0001 C CNN
F 3 "~" H 2500 3575 50 0001 C CNN
1 2250 3650
1 0 0 -1
$EndComp
$Comp
L Device:R R14
U 1 1 5DA5FB60
P 2650 3300
F 0 "R14" V 2443 3300 50 0000 C CNN
F 1 "1.5k" V 2534 3300 50 0000 C CNN
F 2 "Resistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_Horizontal" V 2580 3300 50 0001 C CNN
F 3 "~" H 2650 3300 50 0001 C CNN
1 2650 3300
-1 0 0 1
$EndComp
$Comp
L Device:R R15
U 1 1 5DA60795
P 2150 3300
F 0 "R15" V 1943 3300 50 0000 C CNN
F 1 "1.5k" V 2034 3300 50 0000 C CNN
F 2 "Resistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_Horizontal" V 2080 3300 50 0001 C CNN
F 3 "~" H 2150 3300 50 0001 C CNN
1 2150 3300
-1 0 0 1
$EndComp
$Comp
L Device:R R10
U 1 1 5DA60BCA
P 5900 2750
F 0 "R10" H 5830 2704 50 0000 R CNN
F 1 "2.2k" H 5830 2795 50 0000 R CNN
F 2 "Resistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_Horizontal" V 5830 2750 50 0001 C CNN
F 3 "~" H 5900 2750 50 0001 C CNN
1 5900 2750
-1 0 0 1
$EndComp
$Comp
L Device:R R12
U 1 1 5DA611B2
P 6200 2750
F 0 "R12" H 6130 2704 50 0000 R CNN
F 1 "2.2k" H 6130 2795 50 0000 R CNN
F 2 "Resistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_Horizontal" V 6130 2750 50 0001 C CNN
F 3 "~" H 6200 2750 50 0001 C CNN
1 6200 2750
-1 0 0 1
$EndComp
$Comp
L Device:R R11
U 1 1 5DA61404
P 5850 4250
F 0 "R11" V 6057 4250 50 0000 C CNN
F 1 "560" V 5966 4250 50 0000 C CNN
F 2 "Resistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_Horizontal" V 5780 4250 50 0001 C CNN
F 3 "~" H 5850 4250 50 0001 C CNN
1 5850 4250
0 -1 -1 0
$EndComp
$Comp
L Device:R R13
U 1 1 5DA61983
P 6250 4250
F 0 "R13" V 6457 4250 50 0000 C CNN
F 1 "560" V 6366 4250 50 0000 C CNN
F 2 "Resistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_Horizontal" V 6180 4250 50 0001 C CNN
F 3 "~" H 6250 4250 50 0001 C CNN
1 6250 4250
0 -1 -1 0
$EndComp
$Comp
L Connector:Screw_Terminal_01x03 J1
U 1 1 5DA61FDD
P 1550 5350
F 0 "J1" H 1630 5346 50 0000 L CNN
F 1 "Screw_Terminal_01x03" H 1630 5301 50 0001 L CNN
F 2 "TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type055_RT01503HDWU_1x03_P5.00mm_Horizontal" H 1550 5350 50 0001 C CNN
F 3 "~" H 1550 5350 50 0001 C CNN
1 1550 5350
-1 0 0 1
$EndComp
$Comp
L Connector:Screw_Terminal_01x03 J3
U 1 1 5DA643EF
P 1550 4650
F 0 "J3" H 1630 4646 50 0000 L CNN
F 1 "Screw_Terminal_01x03" H 1630 4601 50 0001 L CNN
F 2 "TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type055_RT01503HDWU_1x03_P5.00mm_Horizontal" H 1550 4650 50 0001 C CNN
F 3 "~" H 1550 4650 50 0001 C CNN
1 1550 4650
-1 0 0 1
$EndComp
Text Label 1750 5450 0 50 ~ 0
OPR
Text Label 1750 5250 0 50 ~ 0
OPL
Text Label 1750 4900 0 50 ~ 0
OAD
Text Label 1750 4550 0 50 ~ 0
OAL
Text Label 1750 4750 0 50 ~ 0
MIDR
Text Label 1750 4650 0 50 ~ 0
MIDL
$Comp
L 410CST1582-rescue:MJ-188LP-8-d_connectors J4
U 1 1 5DA5DDC7
P 3750 3100
F 0 "J4" H 4028 2896 50 0000 L CNN
F 1 "left" H 4028 2805 50 0000 L CNN
F 2 "d_connectors:MJ-188LP-8" H 3750 3100 50 0001 C CNN
F 3 "https://www.farnell.com/datasheets/21845.pdf" H 3750 3100 50 0001 C CNN
1 3750 3100
1 0 0 -1
$EndComp
$Comp
L 410CST1582-rescue:MJ-188LP-8-d_connectors J5
U 1 1 5DA5E8EF
P 4900 3100
F 0 "J5" H 5178 2896 50 0000 L CNN
F 1 "right" H 5178 2805 50 0000 L CNN
F 2 "d_connectors:MJ-188LP-8" H 4900 3100 50 0001 C CNN
F 3 "https://www.farnell.com/datasheets/21845.pdf" H 4900 3100 50 0001 C CNN
1 4900 3100
1 0 0 -1
$EndComp
$Comp
L 410CST1582-rescue:MJ-188LP-8-d_connectors J6
U 1 1 5DA5F0F3
P 6050 3100
F 0 "J6" H 6328 2896 50 0000 L CNN
F 1 "headphone" H 6328 2805 50 0000 L CNN
F 2 "d_connectors:MJ-188LP-8" H 6050 3100 50 0001 C CNN
F 3 "https://www.farnell.com/datasheets/21845.pdf" H 6050 3100 50 0001 C CNN
1 6050 3100
1 0 0 -1
$EndComp
$Comp
L power:GND #PWR03
U 1 1 5DA639E2
P 1750 4050
F 0 "#PWR03" H 1750 3800 50 0001 C CNN
F 1 "GND" H 1755 3877 50 0000 C CNN
F 2 "" H 1750 4050 50 0001 C CNN
F 3 "" H 1750 4050 50 0001 C CNN
1 1750 4050
1 0 0 -1
$EndComp
Wire Wire Line
1750 4050 1750 3750
Wire Wire Line
1750 3750 1850 3750
Wire Wire Line
2350 3750 2250 3750
Wire Wire Line
2250 3750 2250 4050
Wire Wire Line
2250 4050 1750 4050
Connection ~ 1750 4050
$Comp
L power:GND #PWR04
U 1 1 5DA65D96
P 3400 3350
F 0 "#PWR04" H 3400 3100 50 0001 C CNN
F 1 "GND" H 3405 3177 50 0000 C CNN
F 2 "" H 3400 3350 50 0001 C CNN
F 3 "" H 3400 3350 50 0001 C CNN
1 3400 3350
0 1 1 0
$EndComp
$Comp
L power:GND #PWR05
U 1 1 5DA666EA
P 4550 3350
F 0 "#PWR05" H 4550 3100 50 0001 C CNN
F 1 "GND" H 4555 3177 50 0000 C CNN
F 2 "" H 4550 3350 50 0001 C CNN
F 3 "" H 4550 3350 50 0001 C CNN
1 4550 3350
0 1 1 0
$EndComp
$Comp
L power:GND #PWR06
U 1 1 5DA66C38
P 5700 3350
F 0 "#PWR06" H 5700 3100 50 0001 C CNN
F 1 "GND" H 5705 3177 50 0000 C CNN
F 2 "" H 5700 3350 50 0001 C CNN
F 3 "" H 5700 3350 50 0001 C CNN
1 5700 3350
0 1 1 0
$EndComp
Wire Wire Line
6000 3500 6000 4250
Wire Wire Line
5700 4250 5700 3950
Wire Wire Line
5700 3950 5900 3950
Wire Wire Line
5900 3950 5900 3500
Wire Wire Line
6100 3500 6100 4250
Wire Wire Line
6200 3500 6200 3950
Wire Wire Line
6200 3950 6400 3950
Wire Wire Line
6400 3950 6400 4250
Wire Wire Line
6200 2900 6200 3200
Wire Wire Line
5900 3200 5900 2900
$Comp
L power:GND #PWR07
U 1 1 5DA6ABD4
P 5900 2600
F 0 "#PWR07" H 5900 2350 50 0001 C CNN
F 1 "GND" H 5905 2427 50 0000 C CNN
F 2 "" H 5900 2600 50 0001 C CNN
F 3 "" H 5900 2600 50 0001 C CNN
1 5900 2600
-1 0 0 1
$EndComp
$Comp
L power:GND #PWR08
U 1 1 5DA6B074
P 6200 2600
F 0 "#PWR08" H 6200 2350 50 0001 C CNN
F 1 "GND" H 6205 2427 50 0000 C CNN
F 2 "" H 6200 2600 50 0001 C CNN
F 3 "" H 6200 2600 50 0001 C CNN
1 6200 2600
-1 0 0 1
$EndComp
Text GLabel 5800 3100 1 50 Input ~ 0
OAD
Text GLabel 6000 3100 1 50 Input ~ 0
MIDR
Text GLabel 6100 3100 1 50 Input ~ 0
MIDL
Text GLabel 6300 3100 1 50 Input ~ 0
OAL
Wire Wire Line
6300 3100 6300 3200
Wire Wire Line
6300 3200 6200 3200
Connection ~ 6200 3200
Wire Wire Line
6100 3200 6100 3100
Wire Wire Line
6000 3100 6000 3200
Wire Wire Line
5900 3200 5800 3200
Wire Wire Line
5800 3200 5800 3100
Connection ~ 5900 3200
Text GLabel 2000 4550 2 50 Input ~ 0
OAL
Text GLabel 2000 4650 2 50 Input ~ 0
MIDL
Text GLabel 2000 4750 2 50 Input ~ 0
MIDR
Text GLabel 2000 4900 2 50 Input ~ 0
OAD
Wire Wire Line
1750 4650 2000 4650
Wire Wire Line
2000 4750 1750 4750
Wire Wire Line
1750 4550 2000 4550
Wire Wire Line
1750 4900 2000 4900
Wire Wire Line
1750 5250 2000 5250
Wire Wire Line
1750 5450 2000 5450
Wire Wire Line
2150 3450 2150 3750
Wire Wire Line
2650 3450 2650 3750
Text GLabel 2000 5250 2 50 Input ~ 0
OPL
Text GLabel 2000 5450 2 50 Input ~ 0
OPR
Text GLabel 2150 3150 1 50 Input ~ 0
OPL
Text GLabel 2650 3150 1 50 Input ~ 0
OPR
NoConn ~ 3600 3500
NoConn ~ 3700 3500
NoConn ~ 3800 3500
NoConn ~ 3900 3500
NoConn ~ 4750 3500
NoConn ~ 4850 3500
NoConn ~ 4950 3500
NoConn ~ 5050 3500
NoConn ~ 3600 3200
NoConn ~ 3700 3200
NoConn ~ 3800 3200
NoConn ~ 4750 3200
NoConn ~ 4850 3200
NoConn ~ 4950 3200
Wire Wire Line
5050 2750 5050 3200
Wire Wire Line
3900 2850 3900 3200
Text Notes 3050 4050 0 50 ~ 0
the three jacks and the dual pots mounts on back\n\nthe two connectors mount on top
$Comp
L Connector:Screw_Terminal_01x03 J2
U 1 1 5DA8D91A
P 1550 5000
F 0 "J2" H 1630 4996 50 0000 L CNN
F 1 "Screw_Terminal_01x03" H 1630 4951 50 0001 L CNN
F 2 "TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type055_RT01503HDWU_1x03_P5.00mm_Horizontal" H 1550 5000 50 0001 C CNN
F 3 "~" H 1550 5000 50 0001 C CNN
1 1550 5000
-1 0 0 1
$EndComp
$Comp
L power:GND #PWR02
U 1 1 5DA8F572
P 2300 5350
F 0 "#PWR02" H 2300 5100 50 0001 C CNN
F 1 "GND" H 2305 5177 50 0000 C CNN
F 2 "" H 2300 5350 50 0001 C CNN
F 3 "" H 2300 5350 50 0001 C CNN
1 2300 5350
0 -1 -1 0
$EndComp
Wire Wire Line
2300 5350 1750 5350
$Comp
L power:GND #PWR01
U 1 1 5DA90DB3
P 2300 5100
F 0 "#PWR01" H 2300 4850 50 0001 C CNN
F 1 "GND" H 2305 4927 50 0000 C CNN
F 2 "" H 2300 5100 50 0001 C CNN
F 3 "" H 2300 5100 50 0001 C CNN
1 2300 5100
0 -1 -1 0
$EndComp
Wire Wire Line
2300 5100 1850 5100
Wire Wire Line
1750 5000 1850 5000
Wire Wire Line
1850 5000 1850 5100
Connection ~ 1850 5100
Wire Wire Line
1850 5100 1750 5100
Wire Wire Line
2000 2850 2000 3550
Wire Wire Line
2000 2850 3900 2850
Wire Wire Line
5050 2750 2500 2750
Wire Wire Line
2500 2750 2500 3550
$EndSCHEMATC

71723
410CST1582/fp-info-cache

File diff suppressed because it is too large

BIN
410CST1582/gerbers.zip

Binary file not shown.

94
410CST1582/gerbers/410CST1582-B_Cu.gbr

@ -0,0 +1,94 @@
G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,(5.1.2-1)-1*
G04 #@! TF.CreationDate,2019-10-16T09:02:38+02:00*
G04 #@! TF.ProjectId,410CST1582,34313043-5354-4313-9538-322e6b696361,rev?*
G04 #@! TF.SameCoordinates,Original*
G04 #@! TF.FileFunction,Copper,L2,Bot*
G04 #@! TF.FilePolarity,Positive*
%FSLAX46Y46*%
G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
G04 Created by KiCad (PCBNEW (5.1.2-1)-1) date 2019-10-16 09:02:38*
%MOMM*%
%LPD*%
G04 APERTURE LIST*
%ADD10C,3.000000*%
%ADD11C,2.500000*%
%ADD12R,2.500000X2.500000*%
%ADD13C,2.340000*%
%ADD14O,2.400000X2.400000*%
%ADD15C,2.400000*%
G04 APERTURE END LIST*
D10*