Use an Arduino and Python to emulate an Analog Plotter
No puede seleccionar más de 25 temas Los temas deben comenzar con una letra o número, pueden incluir guiones ('-') y pueden tener hasta 35 caracteres de largo.
Dashie der otter ab551b7117
plop
hace 11 meses
read_plotter plop hace 11 meses
.gitignore Add gitignore hace 3 años
README.md Add README hace 3 años

README.md

AT(mega) Analog Plotter

This is a project using an Arduino UNO to act as an Analog Plotter.

This was designed mainly for use with a Philips/Fluke PM3320A.

The analog output is a DIN5 (midi-like) connector, facing from left to right:

  • X
  • GND
  • Y
  • GND
  • Z

With 1V fullscale, and maximum to 12V for Z (actually it doesn't seems to be more than .5/1V and the arduino doesn't have fried).

The arduino schematic and pictures are the following:

FIXME

To use it, build the hardware, upload the sketch and use plotter.py with python3.

This is really basic and may contains errors. I don't have figured exactly the number of counts from the horizontal axis.

The vertical is always 1024 (10bits) height.

The arduino is configured to use INTERNAL AnalogReference, which is 1.1V, because we have a 1V fullscale on the plotter output.