Amiga 2000 revision 6.2 motherboard re-done in KiCAD.
Schematics and PCB done, and working, see README for notes.
WARNING: stability issue with Wicher 500i, could be noise related from accelerator speed.
Você não pode selecionar mais de 25 tópicos Os tópicos devem começar com uma letra ou um número, podem incluir traços ('-') e podem ter até 35 caracteres.
Dashie der otter dc622e61fb
Add orig broken csv
1 mês atrás
bom Some footprint changes; Tidy pcb 3 meses atrás
gerbers Add gerbers 3 meses atrás
kicad_libraries @ 743f819154 Got the components, reduce some footprints 3 meses atrás
pictures Reduce file size 1 mês atrás
sources Use correct source rev6. mostly all schematics done for first pass... 3 meses atrás
.gitignore Add interactive bom 3 meses atrás
.gitmodules Add submodule 3 meses atrás
LICENSE cc0 1 mês atrás
README.md Add power connector ref 1 mês atrás
agnus.sch Some footprints updates; Add all Mouser references 3 meses atrás
amiga2000-cache.lib first placement pass is done 3 meses atrás
amiga2000.broken.csv Add orig broken csv 1 mês atrás
amiga2000.csv Fix CSV 1 mês atrás
amiga2000.kicad_pcb Add gerbers 3 meses atrás
amiga2000.orig.pro Continue placing things 3 meses atrás
amiga2000.pdf Switch footprints for suitable modern replacements 3 meses atrás
amiga2000.pro Correct some components orientation 3 meses atrás
amiga2000.sch All reviews done 3 meses atrás
amiga2000.xml Got the components, reduce some footprints 3 meses atrás
chipram.sch Got the components, reduce some footprints 3 meses atrás
coprocessor slot.sch Some footprints updates; Add all Mouser references 3 meses atrás
denise.sch Got the components, reduce some footprints 3 meses atrás
expansion logic.sch Some footprints updates; Add all Mouser references 3 meses atrás
extract_labels.py Add tools 3 meses atrás
fp-info-cache Got the components, reduce some footprints 3 meses atrás
fp-lib-table Update footprints 3 meses atrás
gerbers.zip Add gerbers 3 meses atrás
parallel.sch Some footprints updates; Add all Mouser references 3 meses atrás
paula.sch Got the components, reduce some footprints 3 meses atrás
pc slots.sch Some footprint changes; Tidy pcb 3 meses atrás
power.sch Got the components, reduce some footprints 3 meses atrás
processor.sch Some footprints updates; Add all Mouser references 3 meses atrás
serial.sch Got the components, reduce some footprints 3 meses atrás
sym-lib-table aa 3 meses atrás
worksheet.kicad_wks Use correct source rev6. mostly all schematics done for first pass... 3 meses atrás
zorro.sch Some footprint changes; Tidy pcb 3 meses atrás

README.md

Amiga 2000 KiCAD Schematics and PCB

Revision

Current schematics are based on 6.0 plus known 6.2 fixes.

Deviations from the original 6.2:

  • The snapped resistor net around the 68k have been removed from schematics.
  • The two res net soldered to U603 and U604 have a dedicated footprint on PCB
  • The bridge C1/R1 also has footprint, same for R2 from U800
  • The PST reset have dedicated footprint, diode have been removed
  • There is an aditionnal header, J3, with OVR and INT2 breakout for accelerator cards, easier than clipping on chips
  • Jumpers should have a default working configuration labelled on the PCB plus various notes
  • The keyboard connector footprint have been modified to handle either the original one, or a standard MIDI one
  • The battery terminals are just a two pins header, just plug some wires and use any battery you want aside or glued or whatever

Notes

The capacitors on the left of the POWER Connector are somewhat troubling if you don’t have a lot of experience.

So the five caps should be placed like this (IGNORE the + footprint on the PCB):

  • C400, GND pin on left
  • C406, GND pin on left
  • C408, GND pin on right
  • C410, GND pin on left
  • C412, GND pin on right

If using an A500-Flash from Retro 7-bit, U540 and U203 can’t be socketted or they will be too high.

Building

The file amiga2000.csv contains a full Mouser BOM, around ~150€.

Memory and RTC chip should be got from eBay, same for the PST reset thingy (U1).

The ISA (8bit and 16bit connectors) fits perfectly a full-length connector got from like an old PC motherboard.

The the table at the bottom of this README for a list of DigiKey and Mouser P/N for ZORRO, CoPro, Video and ISA slots.

Other chips (paula, denise, CIA, etc.) are got from a donor motherboard.

If building it for real: first test the PCB for short between GND and the various power lines (+5V, -5V, +12V, +5V_USER, etc.), the zorro should have all.

Then solder all the electrolytics caps, connect power, re-test all the lines.

Solder everything else, don’t populate ICs yet, re-power and re-test.

Then you can add ICs and run DiagROM and then enjoy.

DO NOT POPULATE: J1, J2, C902, C917, R901, FB904, FB906, RP904, RP906, RP905, C230, C240, they are unpopulated on factory 6.2 rev, so, let them as-is.

Testing

My first prototype have been tested with DiagROM v1.1.

Working: mouse, zorro listing of detected cards, composite video out, video out, serial (out at least), one audio ch (the other one should work too), keyboard. Booting a workbench from the accelerator CF sorta work until noise issue or something make any disk I/O hang and crash.

Left to test: floppy, parallel port, if the RTC works properly.

The DiagROM detects 1024kB of chipmem, the extended test goes all the way up to 1023kB and then throw an error, I’m not sure if it’s a DiagROM issue or just expected.

Libraries

Uses libraries from https://dev.sigpipe.me/dashieelectronics/kicad_libraries

Various tools

extract_labels.py

Use this script to quickly extract all Global Labels from wanted sheets.

./extract_labels.py agnus.sch amiga2000.sch chipram.sch coprocessor\ slot.sch denise.sch expansion\ logic.sch parallel.sch paula.sch pc\ slots.sch power.sch processor.sch serial.sch zorro.sch

License

CC0

Sources

My own dying 6.2 A2000 board.

This pre-6.2 schematics, best scan quality available…:

A big thanks for Floppie209 for his 1:1 board replica:

Whithout Floppie work I wouldn’t have had enough motivation to sacrifice a sorta working board for measurements.

Documented 6.2 fixes: https://wiki.sigpipe.me/amiga:a2000:rev6.2fixes

Random parts numbers

for Digikey PN Mouser PN Manufacturer PN EOL
Zorro (100pins) A121376-ND 571-5645235-3 5645235-3 no
CoPro (86pins) A144213-ND 571-1-5530843-0 1-5530843-0 no
Video Slots and ISA16bit (36p) A31716-ND 571-5530843-3 5530843-3 no
ISA 8bit (62) A121053-ND 571-7-5530843-0 7-5530843-0 no
Full lenght ISA slots A101941-ND 571-5176139-2 5176139-2 no
Power connector, 14 pins 538-26-60-4140 26-60-4140 no

Pictures