hex-keyboard or not. small 10x10cm 5x5 keys programmable keyboard
small brother of https://dev.sigpipe.me/DashieElectronics/dashie-keys
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

config.h 5.7KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191
  1. /*
  2. Copyright 2017 dashie <dashie@sigpipe.me>
  3. This program is free software: you can redistribute it and/or modify
  4. it under the terms of the GNU General Public License as published by
  5. the Free Software Foundation, either version 2 of the License, or
  6. (at your option) any later version.
  7. This program is distributed in the hope that it will be useful,
  8. but WITHOUT ANY WARRANTY; without even the implied warranty of
  9. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  10. GNU General Public License for more details.
  11. You should have received a copy of the GNU General Public License
  12. along with this program. If not, see <http://www.gnu.org/licenses/>.
  13. */
  14. #ifndef CONFIG_H
  15. #define CONFIG_H
  16. #include "config_common.h"
  17. /* USB Device descriptor parameter */
  18. #define VENDOR_ID 0xFEED
  19. #define PRODUCT_ID 0x0000
  20. #define DEVICE_VER 0x0001
  21. #define MANUFACTURER Dashie
  22. #define PRODUCT dashie-hex-keyboard
  23. #define DESCRIPTION A custom keyboard by dashie
  24. /* key matrix size */
  25. #define MATRIX_ROWS 5
  26. #define MATRIX_COLS 5
  27. /*
  28. * Keyboard Matrix Assignments
  29. *
  30. * Change this to how you wired your keyboard
  31. * COLS: AVR pins used for columns, left to right
  32. * ROWS: AVR pins used for rows, top to bottom
  33. * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
  34. * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
  35. *
  36. */
  37. #define MATRIX_ROW_PINS { F7, B6, B5, B4, D7 }
  38. #define MATRIX_COL_PINS { F0, F1, F4, F5, F6 }
  39. #define UNUSED_PINS
  40. /* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
  41. #define DIODE_DIRECTION COL2ROW
  42. // #define BACKLIGHT_PIN B7
  43. // #define BACKLIGHT_BREATHING
  44. // #define BACKLIGHT_LEVELS 3
  45. /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
  46. #define DEBOUNCING_DELAY 5
  47. /* define if matrix has ghost (lacks anti-ghosting diodes) */
  48. //#define MATRIX_HAS_GHOST
  49. /* number of backlight levels */
  50. /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
  51. #define LOCKING_SUPPORT_ENABLE
  52. /* Locking resynchronize hack */
  53. #define LOCKING_RESYNC_ENABLE
  54. /* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
  55. * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
  56. */
  57. // #define GRAVE_ESC_CTRL_OVERRIDE
  58. /*
  59. * Force NKRO
  60. *
  61. * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
  62. * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
  63. * makefile for this to work.)
  64. *
  65. * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
  66. * until the next keyboard reset.
  67. *
  68. * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
  69. * fully operational during normal computer usage.
  70. *
  71. * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
  72. * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
  73. * bootmagic, NKRO mode will always be enabled until it is toggled again during a
  74. * power-up.
  75. *
  76. */
  77. //#define FORCE_NKRO
  78. /*
  79. * Magic Key Options
  80. *
  81. * Magic keys are hotkey commands that allow control over firmware functions of
  82. * the keyboard. They are best used in combination with the HID Listen program,
  83. * found here: https://www.pjrc.com/teensy/hid_listen.html
  84. *
  85. * The options below allow the magic key functionality to be changed. This is
  86. * useful if your keyboard/keypad is missing keys and you want magic key support.
  87. *
  88. */
  89. /* key combination for magic key command */
  90. #define IS_COMMAND() ( \
  91. keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
  92. )
  93. /* control how magic key switches layers */
  94. //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
  95. //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
  96. //#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
  97. /* override magic key keymap */
  98. //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
  99. //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
  100. //#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
  101. //#define MAGIC_KEY_HELP1 H
  102. //#define MAGIC_KEY_HELP2 SLASH
  103. //#define MAGIC_KEY_DEBUG D
  104. //#define MAGIC_KEY_DEBUG_MATRIX X
  105. //#define MAGIC_KEY_DEBUG_KBD K
  106. //#define MAGIC_KEY_DEBUG_MOUSE M
  107. //#define MAGIC_KEY_VERSION V
  108. //#define MAGIC_KEY_STATUS S
  109. //#define MAGIC_KEY_CONSOLE C
  110. //#define MAGIC_KEY_LAYER0_ALT1 ESC
  111. //#define MAGIC_KEY_LAYER0_ALT2 GRAVE
  112. //#define MAGIC_KEY_LAYER0 0
  113. //#define MAGIC_KEY_LAYER1 1
  114. //#define MAGIC_KEY_LAYER2 2
  115. //#define MAGIC_KEY_LAYER3 3
  116. //#define MAGIC_KEY_LAYER4 4
  117. //#define MAGIC_KEY_LAYER5 5
  118. //#define MAGIC_KEY_LAYER6 6
  119. //#define MAGIC_KEY_LAYER7 7
  120. //#define MAGIC_KEY_LAYER8 8
  121. //#define MAGIC_KEY_LAYER9 9
  122. //#define MAGIC_KEY_BOOTLOADER PAUSE
  123. //#define MAGIC_KEY_LOCK CAPS
  124. //#define MAGIC_KEY_EEPROM E
  125. //#define MAGIC_KEY_NKRO N
  126. //#define MAGIC_KEY_SLEEP_LED Z
  127. /*
  128. * Feature disable options
  129. * These options are also useful to firmware size reduction.
  130. */
  131. /* disable debug print */
  132. //#define NO_DEBUG
  133. /* disable print */
  134. //#define NO_PRINT
  135. /* disable action features */
  136. //#define NO_ACTION_LAYER
  137. //#define NO_ACTION_TAPPING
  138. //#define NO_ACTION_ONESHOT
  139. //#define NO_ACTION_MACRO
  140. //#define NO_ACTION_FUNCTION
  141. /*
  142. * MIDI options
  143. */
  144. /* Prevent use of disabled MIDI features in the keymap */
  145. //#define MIDI_ENABLE_STRICT 1
  146. /* enable basic MIDI features:
  147. - MIDI notes can be sent when in Music mode is on
  148. */
  149. //#define MIDI_BASIC
  150. /* enable advanced MIDI features:
  151. - MIDI notes can be added to the keymap
  152. - Octave shift and transpose
  153. - Virtual sustain, portamento, and modulation wheel
  154. - etc.
  155. */
  156. //#define MIDI_ADVANCED
  157. /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
  158. //#define MIDI_TONE_KEYCODE_OCTAVES 1
  159. #endif