Quellcode durchsuchen

Add QMK firmware

master
Dashie der otter vor 6 Monaten
Ursprung
Commit
93061a2c83
Signiert von: Dashie <dashie@sigpipe.me> GPG-Schlüssel-ID: C2D57B325840B755

+ 191
- 0
firmware/dashie_hex_keyboard/config.h Datei anzeigen

@@ -0,0 +1,191 @@
1
+/*
2
+Copyright 2017 dashie <dashie@sigpipe.me>
3
+
4
+This program is free software: you can redistribute it and/or modify
5
+it under the terms of the GNU General Public License as published by
6
+the Free Software Foundation, either version 2 of the License, or
7
+(at your option) any later version.
8
+
9
+This program is distributed in the hope that it will be useful,
10
+but WITHOUT ANY WARRANTY; without even the implied warranty of
11
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
12
+GNU General Public License for more details.
13
+
14
+You should have received a copy of the GNU General Public License
15
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
16
+*/
17
+
18
+#ifndef CONFIG_H
19
+#define CONFIG_H
20
+
21
+#include "config_common.h"
22
+
23
+/* USB Device descriptor parameter */
24
+#define VENDOR_ID       0xFEED
25
+#define PRODUCT_ID      0x0000
26
+#define DEVICE_VER      0x0001
27
+#define MANUFACTURER    Dashie
28
+#define PRODUCT         dashie-hex-keyboard
29
+#define DESCRIPTION     A custom keyboard by dashie
30
+
31
+/* key matrix size */
32
+#define MATRIX_ROWS 5
33
+#define MATRIX_COLS 5
34
+
35
+/*
36
+ * Keyboard Matrix Assignments
37
+ *
38
+ * Change this to how you wired your keyboard
39
+ * COLS: AVR pins used for columns, left to right
40
+ * ROWS: AVR pins used for rows, top to bottom
41
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
42
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
43
+ *
44
+*/
45
+
46
+#define MATRIX_ROW_PINS { F7, B6, B5, B4, D7 }
47
+#define MATRIX_COL_PINS { F0, F1, F4, F5, F6 }
48
+#define UNUSED_PINS
49
+
50
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
51
+#define DIODE_DIRECTION COL2ROW
52
+
53
+// #define BACKLIGHT_PIN B7
54
+// #define BACKLIGHT_BREATHING
55
+// #define BACKLIGHT_LEVELS 3
56
+
57
+
58
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
59
+#define DEBOUNCING_DELAY 5
60
+
61
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
62
+//#define MATRIX_HAS_GHOST
63
+
64
+/* number of backlight levels */
65
+
66
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
67
+#define LOCKING_SUPPORT_ENABLE
68
+/* Locking resynchronize hack */
69
+#define LOCKING_RESYNC_ENABLE
70
+
71
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
72
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
73
+ */
74
+// #define GRAVE_ESC_CTRL_OVERRIDE
75
+
76
+/*
77
+ * Force NKRO
78
+ *
79
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
80
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
81
+ * makefile for this to work.)
82
+ *
83
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
84
+ * until the next keyboard reset.
85
+ *
86
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
87
+ * fully operational during normal computer usage.
88
+ *
89
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
90
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
91
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
92
+ * power-up.
93
+ *
94
+ */
95
+//#define FORCE_NKRO
96
+
97
+/*
98
+ * Magic Key Options
99
+ *
100
+ * Magic keys are hotkey commands that allow control over firmware functions of
101
+ * the keyboard. They are best used in combination with the HID Listen program,
102
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
103
+ *
104
+ * The options below allow the magic key functionality to be changed. This is
105
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
106
+ *
107
+ */
108
+
109
+/* key combination for magic key command */
110
+#define IS_COMMAND() ( \
111
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
112
+)
113
+
114
+/* control how magic key switches layers */
115
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
116
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
117
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
118
+
119
+/* override magic key keymap */
120
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
121
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
122
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
123
+//#define MAGIC_KEY_HELP1          H
124
+//#define MAGIC_KEY_HELP2          SLASH
125
+//#define MAGIC_KEY_DEBUG          D
126
+//#define MAGIC_KEY_DEBUG_MATRIX   X
127
+//#define MAGIC_KEY_DEBUG_KBD      K
128
+//#define MAGIC_KEY_DEBUG_MOUSE    M
129
+//#define MAGIC_KEY_VERSION        V
130
+//#define MAGIC_KEY_STATUS         S
131
+//#define MAGIC_KEY_CONSOLE        C
132
+//#define MAGIC_KEY_LAYER0_ALT1    ESC
133
+//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
134
+//#define MAGIC_KEY_LAYER0         0
135
+//#define MAGIC_KEY_LAYER1         1
136
+//#define MAGIC_KEY_LAYER2         2
137
+//#define MAGIC_KEY_LAYER3         3
138
+//#define MAGIC_KEY_LAYER4         4
139
+//#define MAGIC_KEY_LAYER5         5
140
+//#define MAGIC_KEY_LAYER6         6
141
+//#define MAGIC_KEY_LAYER7         7
142
+//#define MAGIC_KEY_LAYER8         8
143
+//#define MAGIC_KEY_LAYER9         9
144
+//#define MAGIC_KEY_BOOTLOADER     PAUSE
145
+//#define MAGIC_KEY_LOCK           CAPS
146
+//#define MAGIC_KEY_EEPROM         E
147
+//#define MAGIC_KEY_NKRO           N
148
+//#define MAGIC_KEY_SLEEP_LED      Z
149
+
150
+/*
151
+ * Feature disable options
152
+ *  These options are also useful to firmware size reduction.
153
+ */
154
+
155
+/* disable debug print */
156
+//#define NO_DEBUG
157
+
158
+/* disable print */
159
+//#define NO_PRINT
160
+
161
+/* disable action features */
162
+//#define NO_ACTION_LAYER
163
+//#define NO_ACTION_TAPPING
164
+//#define NO_ACTION_ONESHOT
165
+//#define NO_ACTION_MACRO
166
+//#define NO_ACTION_FUNCTION
167
+
168
+/*
169
+ * MIDI options
170
+ */
171
+
172
+/* Prevent use of disabled MIDI features in the keymap */
173
+//#define MIDI_ENABLE_STRICT 1
174
+
175
+/* enable basic MIDI features:
176
+   - MIDI notes can be sent when in Music mode is on
177
+*/
178
+//#define MIDI_BASIC
179
+
180
+/* enable advanced MIDI features:
181
+   - MIDI notes can be added to the keymap
182
+   - Octave shift and transpose
183
+   - Virtual sustain, portamento, and modulation wheel
184
+   - etc.
185
+*/
186
+//#define MIDI_ADVANCED
187
+
188
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
189
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
190
+
191
+#endif

+ 43
- 0
firmware/dashie_hex_keyboard/dashie_hex_keyboard.c Datei anzeigen

@@ -0,0 +1,43 @@
1
+/* Copyright 2017 dashie <dashie@sigpipe.me>
2
+ *
3
+ * This program is free software: you can redistribute it and/or modify
4
+ * it under the terms of the GNU General Public License as published by
5
+ * the Free Software Foundation, either version 2 of the License, or
6
+ * (at your option) any later version.
7
+ *
8
+ * This program is distributed in the hope that it will be useful,
9
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
10
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
11
+ * GNU General Public License for more details.
12
+ *
13
+ * You should have received a copy of the GNU General Public License
14
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
15
+ */
16
+#include "dashie_hex_keyboard.h"
17
+
18
+void matrix_init_kb(void) {
19
+	// put your keyboard start-up code here
20
+	// runs once when the firmware starts up
21
+
22
+	matrix_init_user();
23
+}
24
+
25
+void matrix_scan_kb(void) {
26
+	// put your looping keyboard code here
27
+	// runs every cycle (a lot)
28
+
29
+	matrix_scan_user();
30
+}
31
+
32
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
33
+	// put your per-action keyboard code here
34
+	// runs for every action, just before processing by the firmware
35
+
36
+	return process_record_user(keycode, record);
37
+}
38
+
39
+void led_set_kb(uint8_t usb_led) {
40
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
41
+
42
+	led_set_user(usb_led);
43
+}

+ 39
- 0
firmware/dashie_hex_keyboard/dashie_hex_keyboard.h Datei anzeigen

@@ -0,0 +1,39 @@
1
+/* Copyright 2017 dashie <dashie@sigpipe.me>
2
+ *
3
+ * This program is free software: you can redistribute it and/or modify
4
+ * it under the terms of the GNU General Public License as published by
5
+ * the Free Software Foundation, either version 2 of the License, or
6
+ * (at your option) any later version.
7
+ *
8
+ * This program is distributed in the hope that it will be useful,
9
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
10
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
11
+ * GNU General Public License for more details.
12
+ *
13
+ * You should have received a copy of the GNU General Public License
14
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
15
+ */
16
+#ifndef DASHIE_HEX_KEYBOARD_H
17
+#define DASHIE_HEX_KEYBOARD_H
18
+
19
+#include "quantum.h"
20
+
21
+// This a shortcut to help you visually see your layout.
22
+// The first section contains all of the arguments
23
+// The second converts the arguments into a two-dimensional array
24
+#define KEYMAP( \
25
+    K000, K001, K002, K003, K004, \
26
+    K005, K006, K007, K008, K009, \
27
+    K010, K011, K012, K013, K014, \
28
+    K015, K016, K017, K019, K020, \
29
+    K021, K022, K023, K024, K025 \
30
+) \
31
+{ \
32
+	{ K000,  K001,  K002,  K003,  K004 }, \
33
+    { K005,  K006,  K007,  K008,  K009 }, \
34
+    { K010,  K011,  K012,  K013,  K014 }, \
35
+    { K015,  K016,  K017,  K019,  K020 }, \
36
+    { K021,  K022,  K023,  K024,  K025 }  \
37
+}
38
+
39
+#endif

+ 24
- 0
firmware/dashie_hex_keyboard/keymaps/default/config.h Datei anzeigen

@@ -0,0 +1,24 @@
1
+/* Copyright 2017 dashie <dashie@sigpipe.me>
2
+ *
3
+ * This program is free software: you can redistribute it and/or modify
4
+ * it under the terms of the GNU General Public License as published by
5
+ * the Free Software Foundation, either version 2 of the License, or
6
+ * (at your option) any later version.
7
+ *
8
+ * This program is distributed in the hope that it will be useful,
9
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
10
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
11
+ * GNU General Public License for more details.
12
+ *
13
+ * You should have received a copy of the GNU General Public License
14
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
15
+ */
16
+
17
+#ifndef CONFIG_USER_H
18
+#define CONFIG_USER_H
19
+
20
+#include "config_common.h"
21
+
22
+// place overrides here
23
+
24
+#endif

+ 90
- 0
firmware/dashie_hex_keyboard/keymaps/default/keymap.c Datei anzeigen

@@ -0,0 +1,90 @@
1
+/* Copyright 2017 dashie <dashie@sigpipe.me>
2
+ *
3
+ * This program is free software: you can redistribute it and/or modify
4
+ * it under the terms of the GNU General Public License as published by
5
+ * the Free Software Foundation, either version 2 of the License, or
6
+ * (at your option) any later version.
7
+ *
8
+ * This program is distributed in the hope that it will be useful,
9
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
10
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
11
+ * GNU General Public License for more details.
12
+ *
13
+ * You should have received a copy of the GNU General Public License
14
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
15
+ */
16
+#include "dashie_hex_keyboard.h"
17
+
18
+/*
19
+ * There is four layers : 0, 1, 2, 3
20
+ * The layer key permit switching to the next layer, on the 3rd one, it goes
21
+ * back to layer 0
22
+ * See https://docs.qmk.fm/#/feature_advanced_keycodes?id=switching-and-toggling-layers
23
+ */
24
+
25
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
26
+    [0] = KEYMAP( /* Layer 1 */
27
+            KC_P0,  KC_P1,   KC_P2,    KC_P3,   KC_P4,
28
+            KC_P5,  KC_P6,   KC_P7,    KC_P8,   KC_P9,
29
+            KC_A,   KC_B,    KC_C,     KC_D,    KC_E,
30
+            KC_F,   KC_MINS, KC_SLSH,  KC_PDOT, KC_SPC,
31
+            DF(1),  KC_LEFT, KC_RIGHT, KC_BSPC, KC_ENTER
32
+            ),
33
+    [1] = KEYMAP( /* Layer 2 */
34
+            KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
35
+            KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
36
+            KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
37
+            KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
38
+            DF(2),   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
39
+            ),
40
+    [2] = KEYMAP( /* Layer 3 */
41
+            KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
42
+            KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
43
+            KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
44
+            KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
45
+            DF(3),   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
46
+            ),
47
+    [3] = KEYMAP( /* Layer 4, last one */
48
+            KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
49
+            KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
50
+            KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
51
+            KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
52
+            DF(0),   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
53
+            ),
54
+};
55
+
56
+const uint16_t PROGMEM fn_actions[] = {
57
+
58
+};
59
+
60
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
61
+{
62
+    // MACRODOWN only works in this function
63
+    switch(id) {
64
+        case 0:
65
+            if (record->event.pressed) {
66
+                register_code(KC_RSFT);
67
+            } else {
68
+                unregister_code(KC_RSFT);
69
+            }
70
+            break;
71
+    }
72
+    return MACRO_NONE;
73
+};
74
+
75
+
76
+void matrix_init_user(void) {
77
+
78
+}
79
+
80
+void matrix_scan_user(void) {
81
+
82
+}
83
+
84
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
85
+    return true;
86
+}
87
+
88
+void led_set_user(uint8_t usb_led) {
89
+
90
+}

+ 1
- 0
firmware/dashie_hex_keyboard/keymaps/default/readme.md Datei anzeigen

@@ -0,0 +1 @@
1
+# The default keymap for dashie_hex_keyboard

+ 15
- 0
firmware/dashie_hex_keyboard/readme.md Datei anzeigen

@@ -0,0 +1,15 @@
1
+# dashie_hex_keyboard
2
+
3
+![dashie_hex_keyboard](imgur.com image replace me!)
4
+
5
+A short description of the keyboard/project
6
+
7
+Keyboard Maintainer: [You](https://github.com/yourusername)  
8
+Hardware Supported: The PCBs, controllers supported  
9
+Hardware Availability: links to where you can find this hardware
10
+
11
+Make example for this keyboard (after setting up your build environment):
12
+
13
+    make dashie_hex_keyboard:default
14
+
15
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.

+ 69
- 0
firmware/dashie_hex_keyboard/rules.mk Datei anzeigen

@@ -0,0 +1,69 @@
1
+# MCU name
2
+#MCU = at90usb1286
3
+MCU = atmega32u4
4
+
5
+# Processor frequency.
6
+#     This will define a symbol, F_CPU, in all source code files equal to the
7
+#     processor frequency in Hz. You can then use this symbol in your source code to
8
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
9
+#     automatically to create a 32-bit value in your source code.
10
+#
11
+#     This will be an integer division of F_USB below, as it is sourced by
12
+#     F_USB after it has run through any CPU prescalers. Note that this value
13
+#     does not *change* the processor frequency - it should merely be updated to
14
+#     reflect the processor speed set externally so that the code can use accurate
15
+#     software delays.
16
+F_CPU = 16000000
17
+
18
+
19
+#
20
+# LUFA specific
21
+#
22
+# Target architecture (see library "Board Types" documentation).
23
+ARCH = AVR8
24
+
25
+# Input clock frequency.
26
+#     This will define a symbol, F_USB, in all source code files equal to the
27
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
28
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
29
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
30
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
31
+#     at the end, this will be done automatically to create a 32-bit value in your
32
+#     source code.
33
+#
34
+#     If no clock division is performed on the input clock inside the AVR (via the
35
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
36
+F_USB = $(F_CPU)
37
+
38
+# Interrupt driven control endpoint task(+60)
39
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
40
+
41
+BOOTLOADER = halfkay
42
+
43
+# Boot Section Size in *bytes*
44
+#   Teensy halfKay   512
45
+#   Teensy++ halfKay 1024
46
+#   Atmel DFU loader 4096
47
+#   LUFA bootloader  4096
48
+#   USBaspLoader     2048
49
+OPT_DEFS += -DBOOTLOADER_SIZE=512
50
+
51
+
52
+# Build Options
53
+#   change yes to no to disable
54
+#
55
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
56
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
57
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
58
+CONSOLE_ENABLE = yes        # Console for debug(+400)
59
+COMMAND_ENABLE = yes        # Commands for debug and configuration
60
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
61
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
62
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
63
+NKRO_ENABLE = no            # USB Nkey Rollover
64
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
65
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
66
+UNICODE_ENABLE = no         # Unicode
67
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
68
+AUDIO_ENABLE = no           # Audio output on port C6
69
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches

+ 7
- 8
hex-keyboard.kicad_pcb Datei anzeigen

@@ -3,7 +3,7 @@
3 3
   (general
4 4
     (thickness 1.6)
5 5
     (drawings 4)
6
-    (tracks 158)
6
+    (tracks 157)
7 7
     (zones 0)
8 8
     (modules 56)
9 9
     (nets 50)
@@ -2566,18 +2566,17 @@
2566 2566
   (segment (start 125.095 164.06) (end 106.045 164.06) (width 0.25) (layer B.Cu) (net 25))
2567 2567
   (segment (start 86.995 164.06) (end 106.045 164.06) (width 0.25) (layer B.Cu) (net 25))
2568 2568
   (segment (start 67.945 164.06) (end 86.995 164.06) (width 0.25) (layer B.Cu) (net 25))
2569
-  (segment (start 139.20363 97.79) (end 138.43 98.56363) (width 0.25) (layer F.Cu) (net 25))
2570
-  (segment (start 140.335 97.79) (end 139.20363 97.79) (width 0.25) (layer F.Cu) (net 25))
2571
-  (segment (start 138.880009 99.013639) (end 138.880009 123.640009) (width 0.25) (layer F.Cu) (net 25))
2572
-  (segment (start 138.43 98.56363) (end 138.880009 99.013639) (width 0.25) (layer F.Cu) (net 25))
2573
-  (segment (start 138.880009 123.640009) (end 139.7 124.46) (width 0.25) (layer F.Cu) (net 25))
2574 2569
   (via (at 140.335 162.56) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 25))
2575
-  (segment (start 139.7 124.46) (end 139.7 161.925) (width 0.25) (layer F.Cu) (net 25))
2576
-  (segment (start 139.7 161.925) (end 140.335 162.56) (width 0.25) (layer F.Cu) (net 25))
2577 2570
   (segment (start 141.835 164.06) (end 142.24 164.06) (width 0.25) (layer B.Cu) (net 25))
2578 2571
   (segment (start 140.335 162.56) (end 141.835 164.06) (width 0.25) (layer B.Cu) (net 25))
2579 2572
   (segment (start 144.145 164.06) (end 142.24 164.06) (width 0.25) (layer B.Cu) (net 25))
2580 2573
   (segment (start 142.24 164.06) (end 125.095 164.06) (width 0.25) (layer B.Cu) (net 25))
2574
+  (segment (start 139.7 124.46) (end 139.7 161.925) (width 0.25) (layer F.Cu) (net 25))
2575
+  (segment (start 138.880009 123.640009) (end 139.7 124.46) (width 0.25) (layer F.Cu) (net 25))
2576
+  (segment (start 138.880009 98.113621) (end 138.880009 123.640009) (width 0.25) (layer F.Cu) (net 25))
2577
+  (segment (start 139.7 161.925) (end 140.335 162.56) (width 0.25) (layer F.Cu) (net 25))
2578
+  (segment (start 139.20363 97.79) (end 138.880009 98.113621) (width 0.25) (layer F.Cu) (net 25))
2579
+  (segment (start 140.335 97.79) (end 139.20363 97.79) (width 0.25) (layer F.Cu) (net 25))
2581 2580
   (segment (start 67.945 160.31) (end 67.945 155.575) (width 0.25) (layer B.Cu) (net 26))
2582 2581
   (segment (start 67.945 161.06) (end 67.945 160.31) (width 0.25) (layer B.Cu) (net 26))
2583 2582
   (segment (start 86.995 160.31) (end 86.995 155.575) (width 0.25) (layer B.Cu) (net 27))

Laden…
Abbrechen
Speichern