選択できるのは25トピックまでです。 トピックは、先頭が英数字で、英数字とダッシュ('-')を使用した35文字以内のものにしてください。
Dashie der otter 7c24be6fe8
newlines
7ヶ月前
KiCAD-Keyboard-Tutorial @ db52954a98 Re-route with a new footprint; Good clearances; Re-generate gerbers 2年前
cherry-mx-keycaps @ 41dce8f91c Tests 2年前
cherry_caps Tests 2年前
docs Add missing file 9ヶ月前
firmware/dashie_keys func-ctrl will trigger a ctrl-s 8ヶ月前
gerbers Move the diode away from mounting hole 1年前
marsin-kicad-libs @ 217e4f4fe2 Add another submodule 2年前
teensy.pretty @ 7588840916 Add submodules 2年前
teensy_library @ b9ea79f3b3 Add submodules 2年前
.gitignore Update PCB, Add RTC battery holder 2年前
.gitmodules Re-route with a new footprint; Good clearances; Re-generate gerbers 2年前
README.md newlines 7ヶ月前
TODO.md aaa 8ヶ月前
bom.ini Add BOM 2年前
dashie-keys-cache.lib Some internal kicad update 1年前
dashie-keys-rescue.dcm This may be usefull ? 1年前
dashie-keys-rescue.lib Update 9ヶ月前
dashie-keys.kicad_pcb Move the diode away from mounting hole 1年前
dashie-keys.net Pouet pouet 2年前
dashie-keys.pro First import 2年前
dashie-keys.sch Some internal kicad update 1年前
dashie-keys.xml Add a pin header for a data line for optional WS2812 strip leds 2年前
dashie-keys_.csv Add a pin header for a data line for optional WS2812 strip leds 2年前
dashie-keys_.html Add a pin header for a data line for optional WS2812 strip leds 2年前
fp-lib-table Re-route with a new footprint; Good clearances; Re-generate gerbers 2年前
gerbers.zip Move the diode away from mounting hole 1年前
sym-lib-table Some internal kicad update 1年前

README.md

Dashie Keys

DIY Work in progress of my own keyboard using a Teensy 2.0++ and Cherry MX keys.

BOM

Qty Value Package Parts Description
92 1N4148 1206 D1 to D92 100V 0.15A standard switching diode
2 Conn_01x04 Socket_Strip_Straight_1x04_Pitch2.54mm J2 J3 Generic connector, single row, 01x04
1 Conn_01x02 Socket_Strip_Straight_1x02_Pitch2.54mm J1 Generic connector, single row, 01x02
92 SW_Push SW_Cherry_MX1A_1.00u_PCB SW1 to SW92 Cherry MX switches
88 Cherry Caps SW1 to SW92 except SW42, 48, 55, 70 Cherry MX ‘1u’ caps
3 Cherry Caps SW42, 48, 55 Cherry MX ‘2u’ vertical caps
1 Cherry Caps SW70 Cherry MX ‘6.25u’ spacebar cap
5 SW_Push SW_PUSH_6mm SW96 to SW100 Push button switch, generic
1 Teensy 2.0++ U1 Teensy 2.0++ only

Oops

The schematics does have row1 to row8 but in fact the PCB is, from top to bottom: row8, row1 … row7.

The schematics haven’t been updated for this change, which have been done while routing the board, the bottom row was put on the top for a better layout arrangement, sorry.

The keyboard-layout json and builder reflects properly this change.

PD6 does have the builtin LED, causing some issues.

Cut track between D6 and the switch pin and connect that pin to E0.

E0 is pin number 11 from the right when you have the side with keys in front of you.

See docs/track_fix.jpg for visual.

PCB Revisions

V1

See tag v1 for this revision.

This is the first one I made, some issues, but without too much impact if you are careful:

  • D48 is close to MK5 and may touch
  • lot of vias for ground plane stitching are very close to diodes or plated holes
  • D_1206 from KiCad libraries are made for reflow soldering, a bit tricky by hand, but it can be done slowly and carefuly

V2

This is the state of this current repository.

This PCB revision will fixes all points reported in the V1

Keys

  • Total : 92 keys
    • A-Z, 1-9, ,./\ etc. : 47
    • Modifiers (ctrl, start, altLR, shiftLR, tab, backspace, del, esc) : 11
    • Enter : 1
    • Space : 1
    • Navigation (<>V^, home, end, pg up down) : 8
    • Fx : 12
    • Special keys : 12

From my tastes:

  • clear : 60
    • normals, space, Fx
  • brown : 20
    • modifiers, navigation, enter
  • grey : 12
    • specials

You can choose differents feelings for the keys, you only need “PCB Mount” ones.

Ordering key caps

I ordered from WASD Keyboards :

  • 3x Numpad “Enter” Cherry MX Keycap (R1 2x1.00)
  • Arrow Keys Cherry MX Keycap Set
  • Row 1, Size 1x1 Cherry MX Keycap (R1 1x1)
  • 104-Key Custom Cherry MX Keycap Set (with custom layout file: docs/wasd-104-keys-template.svg)

Firmware

It use QMK firmware

  git clone https://github.com/qmk/qmk_firmware/
  cd qmk_firmware
  make git-submodule
  cp -r ~/where/is/dashie-keys/firmware/dashie_keys keyboards/
  make dashie_keys:default

Then use any Teensy flasher to flash dashie_keys_default.hex.

Firmware special features

There a function key right under ctrl, bottom left of keyboard

I have a “save” icon on my left CTRL key, doing func+ctrl will trigger a CTRL+s

The keyboard can emulate a mouse movements and btns: func+arrow keys, move mouse, func+home=left click, end = right one

There is some multimedia keys too, check keyboard layout

There is a reset key on top-right of keyboard, can be used for programming

Made With

  • KiCAD EDA
    • Version 5.x only, or nightly until 5.x is released. Format isn’t compatible with KiCAD 4.x.

Author

Inspiration and sources

License

Schematics and PCB under MIT. Firmware under GPL2, same as QMK firmware.