Browse Source

Initiate V3

master
Dashie der otter 1 month ago
parent
commit
6d40e5c057
Signed by: dashie <rhaamo@leloop.org> GPG Key ID: C2D57B325840B755
2 changed files with 46 additions and 1 deletions
  1. +37
    -0
      Cherry_MX_SK6812_BS.kicad_mod
  2. +9
    -1
      README.md

+ 37
- 0
Cherry_MX_SK6812_BS.kicad_mod View File

@@ -0,0 +1,37 @@
(module Cherry_MX_SK6812_BS (layer F.Cu) (tedit 5DBC6795)
(fp_text reference REF** (at -6.604 5.334 90) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value Cherry_MX_SK6812_BS (at 0 9.144) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -7.8 -7.8) (end 7.8 -7.8) (layer F.SilkS) (width 0.15))
(fp_line (start 7.8 -7.8) (end 7.8 7.8) (layer F.SilkS) (width 0.15))
(fp_line (start 7.8 7.8) (end -7.8 7.8) (layer F.SilkS) (width 0.15))
(fp_line (start -7.8 7.8) (end -7.8 -7.8) (layer F.SilkS) (width 0.15))
(fp_line (start -2.5 2.5) (end 2.5 2.5) (layer Edge.Cuts) (width 0.12))
(fp_line (start 2.5 2.5) (end 2.5 7.5) (layer Edge.Cuts) (width 0.12))
(fp_line (start 2.5 7.5) (end -2.5 7.5) (layer Edge.Cuts) (width 0.12))
(fp_line (start -2.5 7.5) (end -2.5 2.5) (layer Edge.Cuts) (width 0.12))
(pad "" np_thru_hole circle (at 0 0) (size 3.9878 3.9878) (drill 3.9878) (layers *.Cu *.Mask))
(pad 1 thru_hole circle (at -3.81 -2.54) (size 2.2 2.2) (drill 1.4986) (layers *.Cu *.Mask))
(pad 2 thru_hole circle (at 2.54 -5.08) (size 2.2 2.2) (drill 1.4986) (layers *.Cu *.Mask))
(pad 3 smd rect (at 3.302 3.302) (size 1.5 1.5) (layers F.Cu F.Paste F.Mask))
(pad 4 smd rect (at 3.302 6.731) (size 1.5 1.5) (layers F.Cu F.Paste F.Mask))
(pad 5 smd rect (at -3.302 3.302) (size 1.5 1.5) (layers F.Cu F.Paste F.Mask))
(pad 6 smd rect (at -3.302 6.731) (size 1.5 1.5) (layers F.Cu F.Paste F.Mask))
(pad 1 thru_hole circle (at 3.81 -2.54) (size 2.2 2.2) (drill 1.4986) (layers *.Cu *.Mask))
(pad 2 thru_hole circle (at -2.54 -5.08) (size 2.2 2.2) (drill 1.4986) (layers *.Cu *.Mask))
(pad "" np_thru_hole circle (at 5.08 0) (size 1.4986 1.4986) (drill 1.4986) (layers *.Cu *.Mask))
(pad "" np_thru_hole circle (at -5.08 0) (size 1.4986 1.4986) (drill 1.4986) (layers *.Cu *.Mask))
(model C:/Users/DraconiX/Desktop/Test.step
(offset (xyz -7.35 7.35 -7.8))
(scale (xyz 1 1 1))
(rotate (xyz 90 0 0))
)
(model C:/Users/DraconiX/Desktop/WS2812_RGB_LED_updated.stp
(offset (xyz 0 -5 0.5))
(scale (xyz 1 1 1))
(rotate (xyz 180 0 90))
)
)

+ 9
- 1
README.md View File

@@ -43,9 +43,15 @@ This is the first one I made, some issues, but without too much impact if you ar
* D_1206 from KiCad libraries are made for reflow soldering, a bit tricky by hand, but it can be done slowly and carefuly

### V2

Fixes V1 issues.

### V3
This is the state of this current repository.

This PCB revision will fixes all points reported in the V1
WIP:
- RGB SK6812 support
- display rework (adafruit oled featherwing ?)

## Keys
* Total : 92 keys
@@ -122,3 +128,5 @@ There is a reset key on top-right of keyboard, can be used for programming

Schematics and PCB under MIT.
Firmware under GPL2, same as QMK firmware.
Cherry_MX_SK6812_BS.kicad_mod is from https://draconix.demuddi.de/2019/12/02/kicad-cherrymx-digital-rgb-footprint/


Loading…
Cancel
Save